Deco X60 V1 vs V2
Hi
Anyone know the difference between Deco X60 V1 and Deco X60 V2?
- Subscribe
- Bookmark
- Report Inappropriate Content

Hello, thanks for asking.
Actually, the basic functions and features are the same on both X60 V1 and V2, we generally update the package and product label to mark the package or production revision.
Good days.
- Report Inappropriate Content

Hello, thanks for asking.
Actually, the basic functions and features are the same on both X60 V1 and V2, we generally update the package and product label to mark the package or production revision.
Good days.
- Report Inappropriate Content
- Report Inappropriate Content
I ordered two 3-piece x60 systems (both were backordered at the time). The first to arrive was a v1, the second was a v2. I need to know if there are ANY hardware changes or other advantages between the two systems. I will only keep one of the systems and return the other. I want ot keep the best system. Otherwise, I will return them both.
Regards.
- Report Inappropriate Content
@MajorBulldog I had a similar situation where I ordered two sets of Deco X60 systems. The first set was v1 and the second set came as v2. Now I am having challenges with performing firmware updates. According to tp-link support, the firmware updates will remain on different versions due to the hardware. As of October 23rd, 2020 v1 firmware version is at 1.0.1 build 20200611 Rel. 64412. In contrast, v2 X60 is running firmware v 1.2.5 build 20200709 Rel. 46606. When I performed a firmware update using the Deco app, it does not synchronize. I have also noticed worse stability with v1 hardware. I attempted to do another firmware update recently and left my mesh WiFi system unusable. I ended up resetting all Deco devices back to original settings and will not update firmware just to keep it somewhat working. v1 hardware sometimes will disconnect for no reason and reconnect. The level 1 and level 2 support engineers were no help in trying to isolate the problem after weeks of ongoing discussions. Good luck with your network set-up.
- Report Inappropriate Content
I have a V1.6...just bought from Costco. One of the units randomly disconnects from the mesh then reconnects. Does anybody know whether V2 would fix this? I can still return the system.
- Report Inappropriate Content
UPDATE: Both satellite units frequently disconnect...even though they are hardwired to the main node. Clearly unacceptable. Does V2 fix this?
- Report Inappropriate Content
- Report Inappropriate Content
- Report Inappropriate Content
I Bought 2 from Costco, i received V2 and setup then i bought the second, decided today to set it up. I would not connect to the internet. nor Pair with my First set.
I noticed the version of the second one was V1.6.
It's going back to Costco. Going to see if i can get a V2.
- Report Inappropriate Content
I have just received a 3 pack of V1 X60's. This is nearly 3 months after buying a single unit which was a V2
I can confirm (after initial worries and reading posts here) they ALL run the same firmware.
UK based user...
- Report Inappropriate Content