Deco 4m in router mode with Ziggo connect box

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco 4m in router mode with Ziggo connect box

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco 4m in router mode with Ziggo connect box
Deco 4m in router mode with Ziggo connect box
2020-08-05 07:56:25 - last edited 2020-08-07 11:34:39
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.4.0 build 20200628 Rel.48846

Hi

What are the settings I should adapt .?

Connect box Ziggo  in Bridge 

IPv4  on /of ?  Dynamic IP 

IPv6  on/off  ?Dy namic IP

Lan Ip 192.168.68.1

DHCP server  192.168.68.100 <>250

IPTV/VLAN   off ?

Clone MAC off ?

adres res.off

Port Forwarding off 

TP-Link DDNS  off ?

SIP ALG   is on but what does i mean ? 

UPNP on     but ? 

fast roaming off (older devices do not operate when on ) 

Beamforming on   ok ? 

led control on (i understand this one ;-))

Modus =Router 

  thanks for advice and yes I do hve internet and WIFI in the house 500 mb down 40 up by ZIGGO 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco 4m in router mode with Ziggo connect box -Solution
2020-08-07 11:34:20 - last edited 2020-08-07 11:34:39

@Ocrami 

 

Hello,

 

Do you mean you have a Ziggo modem that is in bridge mode and you are inquiring how to install the Deco M4 in your network? Please refer to the below instructions to install the Deco M4:
Ziggo modem (bridge mode)--main Deco E4 (Router mode))))(((2nd Deco E4

Refer to the below setup video or FAQ to install the Deco E4 and leave other settings by default:
https://www.tp-link.com/support/setup-video/
https://www.tp-link.com/support/faq/2464/

Hopefully, that answers your question but let us know if you need more details.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Deco 4m in router mode with Ziggo connect box -Solution
2020-08-07 11:34:20 - last edited 2020-08-07 11:34:39

@Ocrami 

 

Hello,

 

Do you mean you have a Ziggo modem that is in bridge mode and you are inquiring how to install the Deco M4 in your network? Please refer to the below instructions to install the Deco M4:
Ziggo modem (bridge mode)--main Deco E4 (Router mode))))(((2nd Deco E4

Refer to the below setup video or FAQ to install the Deco E4 and leave other settings by default:
https://www.tp-link.com/support/setup-video/
https://www.tp-link.com/support/faq/2464/

Hopefully, that answers your question but let us know if you need more details.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1352

Replies: 1

Related Articles