Range extander mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I use my router on range extander mode but I'm having a connection problem, there's constant interruptions in my connection.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
If you want to connect this WR840N to your existing wireless router, you can enable the WDS bridging function to give it a go.
https://www.tp-link.com/support/faq/1385/
But if the connection is not stable, you need to confirm below:
1. When the WR840N stops working, with your computer connected to it, please check if you still get an IP address/gateway from it.
2. Ensure the internet connection on your main wireless router is stable, you may connect a phone or laptop to it and confirm.
3. How far away between the 2 routers? Try to move the WR840N closer to the main router.
4. Ensure that the firmware of the WR840N is up-to-date.
Good day.
- Copy Link
- Report Inappropriate Content
Hello,
If you want to connect this WR840N to your existing wireless router, you can enable the WDS bridging function to give it a go.
https://www.tp-link.com/support/faq/1385/
But if the connection is not stable, you need to confirm below:
1. When the WR840N stops working, with your computer connected to it, please check if you still get an IP address/gateway from it.
2. Ensure the internet connection on your main wireless router is stable, you may connect a phone or laptop to it and confirm.
3. How far away between the 2 routers? Try to move the WR840N closer to the main router.
4. Ensure that the firmware of the WR840N is up-to-date.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 585
Replies: 1
Voters 0
No one has voted for it yet.