RE200 connection delay

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE200 connection delay

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE200 connection delay
RE200 connection delay
2020-08-17 07:28:50
Model: RE200  
Hardware Version: V4
Firmware Version: 1.0.6 Build 20200708

I have an RE200 which have a couple of Windows 10 machines connected. Both machines are set to automaticallty connect to the RE200, however this can take 2-3 minuets after logging into Windows. I can sometimes speed up the process by manually selecting the RE200 from the list of wireless networks. If I set these machines to connect automatically to my router the connection is instant despite the poor single strength (hence the RE200).

 

Has anyone else experienced this, and more importantly have a fix?

 

Thanks

  0      
  0      
#1
Options
1 Reply
Re:RE200 connection delay
2020-08-24 02:46:58

@Madgibbon 

Good day.

Thank you very much for your time and patience.

May I know the model number of your main wireless router?

Did you test both the 2.4ghz and 5ghz have the same issue?

Have you ever tested on different devices, like your mobile phone to see if they are always the Windows 10 computers which had the problem.

 

After that, please try the following suggestions:

  1. Try to reserve the IP address for the computers on the main router;
  2. Change the DNS server address on the main router to be 8.8.8.8 /8.8.4.4;
  3. If possible, please also change the advanced settings on the router, like channel 11 and channel width 20mhz for 2.4ghz; channel 40 and channel width 40mhz for 5ghz;

Thank you very much and have a nice day.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 181

Replies: 1

Related Articles