Wifi Extender keeps disconnecting even if it is already besides the main router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wifi Extender keeps disconnecting even if it is already besides the main router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wifi Extender keeps disconnecting even if it is already besides the main router
Wifi Extender keeps disconnecting even if it is already besides the main router
2020-08-24 12:10:52 - last edited 2020-09-27 07:54:59
Model: TL-WA1201  
Hardware Version: V2
Firmware Version: 200104

The wifi extender keeps disconnecting. I have reset and restart it and uodated to latest firmware but signal still disconnecting

  0      
  0      
#1
Options
1 Accepted Solution
Re:Wifi Extender keeps disconnecting even if it is already besides the main router-Solution
2020-09-27 07:54:55 - last edited 2020-09-27 07:54:59

@Bogart 

Good day.

Thank you very much for your time and patience.

Did you set up the TL-WA1201 as an access point?

Do you have a stable connection from the main router?

Have you checked both 2.4ghz and 5ghz have the same issue?

When the signal disconnected, did you still detect the wireless network but fail to connect, and any error message?

By the way, how far away is WA1201 to the home router?

If possible, please try to change the wireless advanced settings on the home router, such as channel 11 for 2.4ghz , channel 40/48 for 5ghz;

And please also try to reserve a fixed IP address  for 1201 on the router;

Thank you very much.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Wifi Extender keeps disconnecting even if it is already besides the main router-Solution
2020-09-27 07:54:55 - last edited 2020-09-27 07:54:59

@Bogart 

Good day.

Thank you very much for your time and patience.

Did you set up the TL-WA1201 as an access point?

Do you have a stable connection from the main router?

Have you checked both 2.4ghz and 5ghz have the same issue?

When the signal disconnected, did you still detect the wireless network but fail to connect, and any error message?

By the way, how far away is WA1201 to the home router?

If possible, please try to change the wireless advanced settings on the home router, such as channel 11 for 2.4ghz , channel 40/48 for 5ghz;

And please also try to reserve a fixed IP address  for 1201 on the router;

Thank you very much.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 583

Replies: 1

Related Articles