TP-Link TL-WR840N v6 00000007 software optimisation
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I will use my tplink 840n v6 router as a wisp mode but the problem was router will freeze all time and it cannot provide good quality of signal coverage and internet speed also very lower than the my providers.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
If you want to connect this WR840N wirelessly to your existing wireless router, you can enable the WDS bridging function to give it a go:
https://www.tp-link.com/support/faq/1385/
But if the connection is not stable, you need to confirm below:
1. When the WR840N stops working, with your computer connected to it, please check if you still get an IP address/gateway from it.
2. Ensure the internet connection on your main wireless router is stable, you may connect a phone or laptop to it and confirm.
3. How far away between the 2 routers? Try to move the WR840N closer to the main router.
4. Ensure that the firmware of the WR840N is up-to-date.
Good days.
- Copy Link
- Report Inappropriate Content
Hello,
If you want to connect this WR840N wirelessly to your existing wireless router, you can enable the WDS bridging function to give it a go:
https://www.tp-link.com/support/faq/1385/
But if the connection is not stable, you need to confirm below:
1. When the WR840N stops working, with your computer connected to it, please check if you still get an IP address/gateway from it.
2. Ensure the internet connection on your main wireless router is stable, you may connect a phone or laptop to it and confirm.
3. How far away between the 2 routers? Try to move the WR840N closer to the main router.
4. Ensure that the firmware of the WR840N is up-to-date.
Good days.
- Copy Link
- Report Inappropriate Content
@Kevin_Z hi, I have similar situation. I checked and cannot see anything related to WDS under Wireless, only Wireless Basic Setting visible.
Does this mean that we need to update the firmware prior to setup wisp ?
Since WDS seems mandatory while the feature is not listed, so what can we do ?
- Copy Link
- Report Inappropriate Content
Hi @Adheet79, I have replied to you in another thread, please check:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 10982
Replies: 3
Voters 0
No one has voted for it yet.