td-w99960 port forwarding only if used another network .

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

td-w99960 port forwarding only if used another network .

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
td-w99960 port forwarding only if used another network .
td-w99960 port forwarding only if used another network .
2020-09-06 07:06:19 - last edited 2020-09-09 10:41:26
Model: TD-W9960  
Hardware Version: V1
Firmware Version: 1.0.0 0.8.0 v009d.0 Build 181115 Rel.61497n

Hello ,

 

i configured my router , so i could access my localhost apache server , after i configured every thing like usual, my web server in unreachable  ,

 

however when i tried to visit it using another network , it work just fine , any solution ?

 

 

 

 

 

 

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:td-w99960 port forwarding only if used another network .-Solution
2020-09-09 10:37:08 - last edited 2020-09-09 10:41:26

@ahmadmarafa 

Good day.

Thank you very much for your time and patience.

The web server, do you mean the web management of the TD-W960?

If yes, since the local login via Http is also using the port 80, maybe you could either change the port for the apache server or the local management;

By the way, what is the internet IP address on the TD-W9960?

Note: If it is a private IP, there would be another firewall outside the TD-W9960, and you might need to open the ports for 9960 as well.

Thank you very much.

2022 TP-Link Wi-Fi 7 Product Launch Event | Watch the Replay at https://www.tp-link.com/us/wifi7/event/
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:td-w99960 port forwarding only if used another network .-Solution
2020-09-09 10:37:08 - last edited 2020-09-09 10:41:26

@ahmadmarafa 

Good day.

Thank you very much for your time and patience.

The web server, do you mean the web management of the TD-W960?

If yes, since the local login via Http is also using the port 80, maybe you could either change the port for the apache server or the local management;

By the way, what is the internet IP address on the TD-W9960?

Note: If it is a private IP, there would be another firewall outside the TD-W9960, and you might need to open the ports for 9960 as well.

Thank you very much.

2022 TP-Link Wi-Fi 7 Product Launch Event | Watch the Replay at https://www.tp-link.com/us/wifi7/event/
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 338

Replies: 1

Related Articles