Home Network Community > Wi-Fi Routers > TL-WR902AC - no internet connection?
< Wi-Fi Routers

TL-WR902AC - no internet connection?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR902AC - no internet connection?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR902AC - no internet connection?
TL-WR902AC - no internet connection?
2020-09-16 04:51:24 - last edited 2020-09-16 06:58:07
Model: TL-WR902AC  
Hardware Version: V3
Firmware Version: 0.9.1 0.3 v0089.0 Build 191018 Rel.34369n(4555)

POL

Witam wszystkich.

Kupiłem router TP-LINK TL-WR902AC 3G LAN DualBand w maju 2020 roku. Działa jako extender. Zrobiłem kopię zapasową konfiguracji. Do wczoraj wszystko było super. Chromecast i smartfon nie łączą się z internetem ale działa Wi-Fi. Dioda zasilania włączona, dioda internetu wyłączona, dioda Wi-Fi włączona. Wyłączyłem i włączyłem zasilanie (restart). Ta sama sytuacja. Przywróciłem kopię zapasową - ta sama sytuacja z diodami, ale działa Chromecast (dostęp do internetu), a smartfon nie. Czemu? Czemu dioda internetu się świeci? Jakieś pomysły?


BTW, aplikacja Tether wykrywa urządzenie extender, ale informuje mnie, że nie jest kompatybilne - na stronie internetowej tplink urządzenie jest wymienione jako zgodne. O co chodzi?

 

ENG

 

Hello All.

I bought Router TP-LINK TL-WR902AC 3G LAN DualBand on May 2020. It works as extender. I did backup of configuration. Everything was great utill yeaterday. Chromecast and smartphone would not connect to internet but wifi works. Power led on, internet led off, wifi led on. I did switch power off and on (restart). Same situation. I've restored backup - same situation with leds but Chromecast works (access to internet) and smartphone has not. Why? Why connection led is off. Any ideas?

 

BTW, Tether app detect the extender device but inform me that it is not compatible - on tplink's web page the device is listed as compatible. What is going on?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TL-WR902AC - no internet connection?-Solution
2020-09-16 06:57:51 - last edited 2020-09-16 06:58:07

@Mikel1978 

 

Hello,

 

It is suggested to check and ensure your host wireless network is still working properly first, ensure you have internet access when you connect the Chromecast and smartphone to it.

 

If the host network is working fine, then refer to the below guide to reset and reconfigure the WR902AC to work as a range extender:

https://www.tp-link.com/support/faq/1502/

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
9 Reply
Re:TL-WR902AC - no internet connection?-Solution
2020-09-16 06:57:51 - last edited 2020-09-16 06:58:07

@Mikel1978 

 

Hello,

 

It is suggested to check and ensure your host wireless network is still working properly first, ensure you have internet access when you connect the Chromecast and smartphone to it.

 

If the host network is working fine, then refer to the below guide to reset and reconfigure the WR902AC to work as a range extender:

https://www.tp-link.com/support/faq/1502/

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:TL-WR902AC - no internet connection?
2020-09-16 07:08:16

@Kevin_Z 

Thank you for answer, I will try. 

Host you mean TL-WR902AC? 

  0  
  0  
#3
Options
Re:TL-WR902AC - no internet connection?
2020-09-16 09:57:26

@Mikel1978 

No, by host router, I mean your main router. I saw this WR902AC works as an extender, so there must be another router, we call it host router?

 

Thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:TL-WR902AC - no internet connection?
2020-09-16 14:14:01 - last edited 2020-09-16 17:57:41

@Kevin_Z 

Okey. Main router (host) is tp-link c20i

  0  
  0  
#5
Options
Re:TL-WR902AC - no internet connection?
2020-09-16 17:44:36 - last edited 2020-09-16 19:39:16

@Kevin_Z 

I did what you wrote. I set up the router as Access Point - cable from ISP I've put in to LAN/WAN port and leds power/internet/wifi are on. Access to internet works on laptop via wifi but I can't launch manage page of router (http://tplinkwifi.net). Strange.

  0  
  0  
#6
Options
Re:TL-WR902AC - no internet connection?
2020-09-17 02:45:23

@Mikel1978 

 

Hello, 

 

Just to confirm, is the network layout as below?

Cable from ISP==>(WAN) Archer C20i (LAN)==>(LAN) WR902AC

 

Is the WR902AC working as an Access Point? What is the IP address of it? You need to change its IP address to be in the same IP subnet as the main C20i, let's say, if the default IP address of your C20i is 192.168.0.1, you need to change the LAN IP address of the WR902AC to 192.168.1.2 or 192.168.1.250, etc. then you should be able to access its web management page.

 

Hope this makes sense.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#7
Options
Re:TL-WR902AC - no internet connection?
2020-09-17 06:12:28

@Kevin_Z 

 

>>Just to confirm, is the network layout as below?

>>Cable from ISP==>(WAN) Archer C20i (LAN)==>(LAN) WR902AC

Correct.

 

>>Is the WR902AC working as an Access Point? What is the IP address of it? You need to change its IP address to be in the same IP subnet as the main C20i, let's say, if the >>default IP address of your C20i is 192.168.0.1, you need to change the LAN IP address of the WR902AC to 192.168.1.2 or 192.168.1.250, etc. then you should be able to access >>its web management page.

Correct

 

Additional info:

I've restored device to default settings. Once again I did configuration as extender via Qiuck Setup according to instruction what you gave.

Confoguration of extender is shown on screen shots.

Internet led is still off and internet connection is still anavailable :(

 

  0  
  0  
#8
Options
Re:TL-WR902AC - no internet connection?
2020-09-18 04:57:38

@Kevin_Z 

Moreover, host (c20i) share DHCP. The extender has MAC 74:DA:88:B4:2D:61 but there is no extender on c20i DHCP Client list. It looks like the extender is not getting an IP address from the host - just why is that? I no set up MAC filtering (Wireless MAC Filtering: is disable) on c20i.

 

  0  
  0  
#9
Options
Re:TL-WR902AC - no internet connection?
2020-09-18 05:19:27 - last edited 2020-09-18 05:21:56

@Kevin_Z

I've changed the static IP to DHCP server on extender.

Now, the extender shows on DHCP client list on C20i and extender has access to internet (but internet led is off) and there no one device on extender DHCP client list (despite I've connected laptop and smartphone to the 2.4_ext wifi so the devices should be on extender DHCP client list).

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 3210

Replies: 9

Related Articles
 WR902AC no internet connection
413 0
tl-wr902ac version
219 0
Ethernet Icon NO INTERNET for TL-WR902AC Travel Router
3093 0
USB 4G for TL-WR902AC
9547 0
TL-WR902ac extender mode
790 0
Restoring Stock firmware on TL-WR902AC
6113 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.