Manual Band Selection for TL-MR6400 V5
Hi ,
My TL-MR6400 Changes LTE band automatically which results in frequent connection loss with weak network signal. I need this manual option to choose LTE Band . Please let me know is there any planned updated of the firmware ? Or is there any other means which I can get away this issue. I am totalty lost , there is no internet connection when I needed at the most.. I am very disppointed with router.
Thanks,
Thoufiq.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Can you please send us the screenshot of the current firmware info on your MR6400 as well as the Advanced>Network>Internet page?
Meanwhile, you may try to reset the router to factory defaults, reconfigure it from scratch, then confirm if you will get it, thanks.
- Copy Link
- Report Inappropriate Content
I tried with firmware TL-MR6400(EU)v5_1.1.0_0.9.1_[201113-rel63736]_up_boot_2020-11-13_17.55.37 but still not able to select band manually.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I can not select 4G only option after upgrade custom firmware. I restored original firmware from TP link.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 25433
Replies: 52