Archer C80 reboots automatically
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
Recently i bought Archer C80 router and i am facing automatic reboot issue fot the same. When it happens, all LED's of Router are turned off and it restarts automatically.
My router is connected to ONU which is connected to fiber cable.
Initially i thought this issue might be due to connection to VPN but it's happening even if its not in use. My connection type is PPPoE and i don't think there is any power supply issue. I tried to trace this issue without much success.
Can you please suggest what can be the issue here?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you very much for all the info you provided, we appreciate it. We will discuss the issue on your own thread, please check and confirm.
- Copy Link
- Report Inappropriate Content
I disabled 5GHz option. Only using 2.4GHz. Not seen any reboots since 4-5 hours. Can you share this with your engineers?
- Copy Link
- Report Inappropriate Content
Definitely sure. Please keep monitoring the router performance, and let me know if there is still an issue.
- Copy Link
- Report Inappropriate Content
@Kevin_Z ,
Hi Kevin,
No reboot since 1day now. So definitely the issue is with 2.4GHz and 5GHz activated simultaneously. When can we expect fix for this?
- Copy Link
- Report Inappropriate Content
In my case it does not help. Last day's I made some tests:
advanced > security > firewall > spi > no effect, back to enable
advanced > network > internet > nat boost > disable - possible reason?
advanced > wireless > advanced > airtime fairness > disable
advanced > wireless > advanced > short gi > disable, no effect, back to enable
advanced > wireless > 2.4 ghz > 11n only > channel 6 - no effect, channel back to auto
advanced > wireless > 5 ghz > 11n/ac mixed > channel 40 - no effect, channel back to auto
Disabled, no need:
advanced > cwmp > inform > disable (used acs url http://127.0.0.1 acs user/passwd tplink)
advanced > iptv/vlan > igmp proxy > disable
advanced > network > ddns > tplink > no-ip > logout
Seems the nat boost service is problematic, with nat boost router crashes, drops connections etc.
So try to enable both frequencies and disable nat boost, also try do disable airtime fairness.
- Copy Link
- Report Inappropriate Content
Do we have any update from your engineers? Have they been able to figure out when restart occurs? It is still happening quite frequently and making this router unusable during office calls.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Not yet. Do you have more details about the auto-reboot issue as we asked previously on #3? How about the power adapter, is it the original one, and it's 12 V ⎓ 1.5 A?
- Copy Link
- Report Inappropriate Content
Everything is original. It was working properly till last software update. Its open and shut case of firmware issue. Disabling 5Ghz, I am not seeing any restarts. Can you guide me if it is possible to downgrade firmware?
- Copy Link
- Report Inappropriate Content
Have You tried to upgrade? You are using v1.4.7, latest is v1.5.3
Firmwares - https://www.tp-link.com/us/support/download/archer-c80/#Firmware
About downgrade, if the router does not allow downgrade please reset it to factory settings and configure it again using just "quick setup". Do not upload previously generated configuration file.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 6175
Replies: 42
Voters 2
