AX6000 low WAN to WLAN speed on AX and AC

AX6000 low WAN to WLAN speed on AX and AC
AX6000 low WAN to WLAN speed on AX and AC
2020-11-18 21:22:26
Hardware Version: V1
Firmware Version: 1.1.1

Smart connect is disabled due to testing other 2.4ghz issues to be posted in another thread

 

Incoming WAN, as tested off a LAN ethernet port: 530mbps (paying for 500, woot!)

 

Speed as tested on an AX device, windows surface laptop 3 reports strong connection 1200/1200 down/up: 300mbps (max, tested across 2 sources)

Speed as tested on AC device: 975mbps "Network Speed" per Samsung: 290-300mbps (max, same as above)

 

Is this normal? No VPN is in use, connected to the same 5ghz network and within 7 ft of router. Would like to see higher WAN>WLAN speed since 200mbps is quite a dropoff

0
0
#1
Options
2 Replies
Re:AX6000 low WAN to WLAN speed on AX and AC
2020-11-20 07:24:00

@robotzor 

 

Hello, please confirm and ensure the QoS setting on the AX6000 is disabled, and no device is in the High priority, or it is suggested to reset the AX6000 and reconfigure it from scratch, don't change any advanced settings and just set up the internet connection on it.

0
0
#2
Options
Re:AX6000 low WAN to WLAN speed on AX and AC
2020-11-20 14:27:42
No QoS is enabled. QoS does however show "520mbps/130mbps" available so the router is definitely getting WAN/LAN at maximum speed, would like this to translate to WLAN as well
0
0
#3
Options