Deco M5 half speed in access point mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I'm having problem with my Deco M5 routers (2pack).
My topology is:
/ deco m5 main
Huawei router - switch tp link 1gb
\ deco m5 secondary
My internet speed is 1000/100mb.
Im using Deco M5 in access point mode and i'm only having 550-580mb speed via builtin speedtest in deco app.
Real wifi speed 5g near router with my iPhone 7 is around 350-450mb/s.
Doesn't matter if im near main or secondary deco, similiar speeds.
So the point is, when I'm switching Deco to router mode I can see 900-980mb/s (as it should be) in deco app.
I guess it's problem with QoS and lack of QoS option in access point mode.
What I should do to use my decos with full speed?
I can't change this Huawei router since it's connected with my ISP.
Best regards
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I am on latest firmware 1.5.1 and I still have same problem . It's also affecting the speedtest on clients . I am getting half the speed in AP mode compared to router mode . My client is hard wired to the Deco . So there is something really up with the Deco M5. Can i try the new beta firmware please ??
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link I did speedtest on clients, and I got same speedtest results as if it was done on Deco mobile app. Is there any updates regarding this issue? I messaged you for the beta firmware.
- Copy Link
- Report Inappropriate Content
Hi, thanks a lot for all your feedback.
We would like to forward your case to the senior engineers for further assistance.
Please have a check of your email box later.
- Copy Link
- Report Inappropriate Content
I'm having the exact same issue. Gigabit fiber internet, deco plugged into ISP router. When running speed test (on m5 or on client) I'm getting full speed when in router mode, but half speed (500mbps) when in AP mode. Is there a fix for this bug?
- Copy Link
- Report Inappropriate Content
Precisely the same issue here, connected on AP mode with updated firmware (1.5.3 Build 20210203 Ref, 68223).
They were tested on the app, showing 100% speed. But, tested on the devices (laptop, desktop, Android mobile, and iPhone) through Wifi, all showing 50% of the original speed.
My speed is only 100mbps.
Does anyone from TP-Link reply on this issue?
- Copy Link
- Report Inappropriate Content
TP-Link wrote
And as for the half-speed issue, it only happens to access point mode since the speed test on Deco APP would require a lot of CPU power from the Deco. When the CPU is overloaded, the measurement might not be accurate.
It would not affect the real download/upload bandwidth on the clients though and they could reach full speed if you run a speed test on these devices.
We will keep optimizing the speed test feature along with the firmware upgrade and please always keep your Deco up to date.
Thanks a lot for your understanding and support.
Hi, actually I am afraid your case is just the opposite.
So it would be highly appreciated that you could start a new thread with the following information:
1. Please leave me a private message about the MAC address of your main Deco.
1. A screenshot of the speed test on the Deco APP.
2. A screenshot of the speed test on the clients on 5ghz.—it would be great if you could test the Ethernet speed from the main Deco as well.
Thank you very much.
- Copy Link
- Report Inappropriate Content
I seem to have this exact same problem and I only noticed it now because my ISP offered me a free speed boost.
My setup:
Linksys rouer to 3 deco m5 with wired backhaul.
Did the test using iperf3 to a server I have wired to the main deco. If I plug my laptop directly to the switch, i get 500mbps. If i am connected to deco #2, i get 250 only. Thats basically half of half my actual speed (1/4). It should be a full gigabit considering I am testing an internet server.
My problem is I cannot use the m5 as my main router since my linksys runs my VPN.
Any help?
- Copy Link
- Report Inappropriate Content
Hi, Thank you for your message.
The speed test under the access point mode sometimes could be inaccurate.
So I wonder when Deco M5 has tested half speed in access point mode, how about the speed test on the clients themselves, and would they also get half speed. or not affected?
- Copy Link
- Report Inappropriate Content
I had a similar problem with my deco reflecting only half of my subscription speed. I went to the QOS and just edited the Total Bandwidth, get internet speed test and the hit test and saved it. Once it has recorded the proper speeds, I ran a speed test and it is now matching the actual speed test.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 17104
Replies: 23
Voters 3
