Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Can I configure Deco M4 to use DHCP server running on the router it is connected to?

< Deco

Can I configure Deco M4 to use DHCP server running on the router it is connected to?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can I configure Deco M4 to use DHCP server running on the router it is connected to?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Shobhan

2020-11-29 09:43:50 - last edited 2021-07-13 01:39:01

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-11-29

Can I configure Deco M4 to use DHCP server running on the router it is connected to?

2020-11-29 09:43:50 - last edited 2021-07-13 01:39:01

Model: Deco M4

Hardware Version:

Firmware Version: 1.4.3 Build 20200918 Rel 74289

Can I configure Deco M4R to use DHCP server running on the router it is connected to? they are running latest Firmware 1.4.3 Build 20200918 Rel 74289.

Currently, Deco is running is its DHCP server and router treats all devices connected to Deco as a single device which I don't want.

1 Accepted Solution

TP-Link

2020-11-30 08:56:06 - last edited 2020-11-30 08:56:10

Posts: 6831

Helpful: 3034

Solutions: 536

Stories: 28

Registered: 2018-07-23

Re:Can I configure Deco M4 to use DHCP server running on the router it is connected to?-Solution

2020-11-30 08:56:06 - last edited 2020-11-30 08:56:10

@Shobhan

Good day,

You could try to set up the Deco as access point mode then it would get IP address from the front DHCP server.

https://www.tp-link.com/support/faq/1842/

Thanks a lot.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

Recommended Solution

2 Reply

TP-Link

2020-11-30 08:56:06 - last edited 2020-11-30 08:56:10

Posts: 6831

Helpful: 3034

Solutions: 536

Stories: 28

Registered: 2018-07-23

Re:Can I configure Deco M4 to use DHCP server running on the router it is connected to?-Solution

2020-11-30 08:56:06 - last edited 2020-11-30 08:56:10

@Shobhan

Good day,

You could try to set up the Deco as access point mode then it would get IP address from the front DHCP server.

https://www.tp-link.com/support/faq/1842/

Thanks a lot.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

Can I configure Deco M4 to use DHCP server running on the router it is connected to?

Can I configure Deco M4 to use DHCP server running on the router it is connected to?

Information

Voters 0

Tags