New Firmware Release--Archer AX10(US) 1.20
Hello everyone,
We have released a new firmware for the Archer AX10(US) 1.20 1.1.5 Build 20201230. For those experiencing issues like 2.4G downloading speed is slow or devices failed to communicate with each other when connected to the same Wi-Fi, update your router firmware first. You may get the new firmware on the router web interface or download it from the TP-Link website:
https://www.tp-link.com/support/download/archer-ax10/v1.20/#Firmware
Review the below firmware release notes to learn more about the improvements.
Archer AX10(US)_V1.2_201230 (Includes all the bug-fix changes and new features in the previous 201116 version)
New Features/Enhancement:
1. Optimized the channel switching algorithm in different countries when the channel is selected as "Auto".
Bug Fixed:
1. Fixed the bug that keywords cannot be added to the filter content in the parental control profile.
Bug-fix Changes:
1. Fixed the bug of slow 2.4G download speed under some circumstances;
2. Fixed the bug that devices connected to the same Wi-Fi sometimes cannot communicate with each other;
3. Fixed the bug that Wireless Schedule and Bed Time do not take effect as per the schedule;
4. Fixed the bug of not being able to access the Internet via IPv6 under specific circumstances.
New Features/Enhancement:
1. Added Smart Connect Function in AP mode;
2. Enhanced the security of the Web interface.
Note: It appears the firmware is not able to be downgraded to the previous version once updated. Should your router be working as is, this update would be optional.
Comment below to let the community know if you still encounter an issue with your Archer AX10.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I've had issues where it would be connected to wifi but there is no data activity, (webpage starts to load and then pauses) Youtube video freezes in the middle of playback. Happened on 1.1.1 firmware..
Just updated to 1.1.3 will be monitoring for the same behavior...
- Copy Link
- Report Inappropriate Content
Hi, your issue seems different from what we discussed on this post, we will continue to figure it out on your own:
- Copy Link
- Report Inappropriate Content
Hello,
...after update to latest firmware, my tablet Samsung Tab S7plus, connected over 5Ghz Wifi6, wpa2, is not capable more than 50~60Mbps download, but 600~700Mbps upload, also my phone Galaxy S20 have the same download/upload speed over Wifi6, but my phone Galaxy S10 have 600~700Mbps upload/download speed....before this update all was ok...
- Copy Link
- Report Inappropriate Content
Are there any QoS settings on the AX10 for some specific devices? Disable it, or reset the AX10 to factory defaults then reconfigure it from scratch, connect these tablets and phones to the 5G network again to confirm if the speed is normal.
Please check the link speed on the tablets/phones when they connect to the 5G network if the speed is still abnormal, show us the screenshots, thanks.
BTW, what is the distance between these tablets/phones and the AX10? What if you move closer? How about other devices in the network, such as laptops?
- Copy Link
- Report Inappropriate Content
...no, there are no qos settings, I've done two times hardware reset, no special setting, all defaults, I have a small apartment, all devices are in 3m distance from router, birds view, no wall or something else in between, rest of devices are not wifi6 and work correct, speed connection on tablet displayed is 1.2Gbps, speed on S10 is 864Mbps, speed on S20 is 967Mbps...
- Copy Link
- Report Inappropriate Content
Thank you very much for the quick reply and detailed info. The tech team was made aware of your issue, they will likely reach out to you via email to continue to troubleshoot your issue.
- Copy Link
- Report Inappropriate Content
Hi!
I have an AX10 from my ISP and it has custom made firmware. I tried flashing it with TfTP but with no success. This cutom made firmware sucks big time and i want original TP Link firmware and i cannot rewrite it. This custom made firmware don't have the options for multiple conenctions, only pppoe, don't have upgrade firmware option or acces point option, which i need most.
Any suggestions would be much appreciated!
Thank you!
- Copy Link
- Report Inappropriate Content
Hi, may I know where did you get this Archer AX10, what is the name of the ISP? As per your description, it seems a customized version for the local Service Provider, which means the firmware of the router is self-designed by your ISP, so you cannot update with the generic firmware.
Generally, the support for this customized version will be covered by your ISP, and we suggest you contact your ISP first to check if there is any limitation on the firmware.
BTW, can you please share me with the device bottom label, as well as the firmware version of it? Thanks.
- Copy Link
- Report Inappropriate Content
It's RCS&RDS Romania and the firmware i cannot access, cause it has no option to show info or update. The firmware option was removed.
It's something from Digi Romania, a custom firmware.
My main router is a Archer C8 and i want this router to make it AP, and the option is also removed.
Thank you!
- Copy Link
- Report Inappropriate Content
Hi, we can confirm this is a specially designed version for the local ISP, that is Digi Romania, so you cannot upgrade to the generic firmware on it. Please contact Digi Romania directly to check if he has newer firmware for the router.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 12910
Replies: 44
Voters 0
No one has voted for it yet.