Home Network Community > Deco > Auto change adres in DHCP server
< Deco

Auto change adres in DHCP server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Auto change adres in DHCP server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Auto change adres in DHCP server
Auto change adres in DHCP server
2020-12-04 18:39:23
Model: Deco M4  
Hardware Version:
Firmware Version:

hello

I have problem with my deco m4, few time router change ip adres and dhcp range, first it was 192.168.0.xxx, after some time changed to 192.168.1.xxx, after next few weeks changed again to 192.168.0.xxx.
It made me crazy, do a bit problems with my home networks :(

Why?

Is it any possibility to set this setings ONCE FOR ALL TIME????

 

Ty in advance

  0      
 
  0      
 
#1
Options
3 Reply
Re:Auto change adres in DHCP server
2020-12-11 09:44:19

@rkarolek 

Hi, Sorry for the delay.

For this issue, most of time, it is related to the IP conflict.

Could you please refer to the following suggestion to have a look:

1. Please check on the IPv4 settings whether the DNS or gateway would be 192.168.0.1?

2. Was Deco the only DHCP server in the network and would there be another router that use IP address 192.168.0.1?

 

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:Auto change adres in DHCP server
2020-12-11 10:55:55

@TP-Link 

I have two routers connected in line
first is router with LTE modem, IP 192.168.8.1, mask 255.255.255.0, and DHCP in range 192.168..8.100-200.

second is main Deco (conected by RJ45), IP 192.168.0.1, mask 255.255.255.0, and DHC in range 192.168.0.100-200
All devices in my network connected to Deco net, and no other DHCP serwer in this net

 

Problem is that Deco change from time to time IP adres for example from 192.168.0.1 to 192.168.1.1, automatically all devices change adresses but problem is with adresses which i have to wrote in config's file (for example MQTT broker)

 

It's very frustrating :(

 

PS.I know that i can set Deco in AP mode and using DHCP from firs router but i bought deco for MESH and Parental QoS... 

 

  0  
  0  
#3
Options
Re:Auto change adres in DHCP server
2020-12-14 06:44:58

@rkarolek 

Good day,

Thanks for your kind reply.

We would like to follow up on your case by email and please have a check of your email box later.

 

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 801

Replies: 3

Related Articles
 How can i change my LAN ip adres?
781 0
 Change e-mail adres for account
11788 5
DHCP server not stable
697 0
er605 as dhcp server
1106 0
Can I configure Deco M4 to use DHCP server running on the router it is connected to?
1276 0
 AX50 Change channel auto
1883 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.