Forums

Home Network Community > Range Extenders > RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

< Range Extenders

RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

GSKO

LV1

2020-12-14 09:26:16 - last edited 2020-12-17 08:33:42

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-12-14

RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

2020-12-14 09:26:16 - last edited 2020-12-17 08:33:42

Model: RE450

Hardware Version: V2

Firmware Version: 1.0.4

I recently upgrade from 1.0.4 to 1.0.5 and the power schedule is not working anymore. By downgrading to 1.0.4, it was working again.

RE450 v2 used as Access Point.

Time setting is OK with both firmware (GMT+1)

Daylight saving time enabled

Led OFF time from 00:00 to 23:59

Power OFF time from 22:00 to 06:30

1 Accepted Solution

TP-Link

2020-12-17 08:33:23 - last edited 2020-12-17 08:33:42

Posts: 6834

Helpful: 2524

Solutions: 534

Stories: 28

Registered: 2018-07-23

Re:RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914-Solution

2020-12-17 08:33:23 - last edited 2020-12-17 08:33:42

@GSKO

Good day!

Thank you very much for your feedback.

This issue was caused by the DST(Daylight Saving Time).

Currently, please disable the DST(Daylight Saving Time) to make the LED control function work.

We will solve this problem later with the new firmware.

Please kindly check our official website periodically later to get the latest firmware.

Thank you!

Deco Monthly Recap- Check What's Currently Going on With Deco

Recommended Solution

2 Reply

TP-Link

2020-12-17 08:33:23 - last edited 2020-12-17 08:33:42

Posts: 6834

Helpful: 2524

Solutions: 534

Stories: 28

Registered: 2018-07-23

Re:RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914-Solution

2020-12-17 08:33:23 - last edited 2020-12-17 08:33:42

@GSKO

Good day!

Thank you very much for your feedback.

This issue was caused by the DST(Daylight Saving Time).

Currently, please disable the DST(Daylight Saving Time) to make the LED control function work.

We will solve this problem later with the new firmware.

Please kindly check our official website periodically later to get the latest firmware.

Thank you!

Deco Monthly Recap- Check What's Currently Going on With Deco

Information

Helpful: 0

Replies: 2

RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

RE450 v2 Power schedule doesn't work anymore with the new firmware RE450(EU)_V2__200914

Information

Voters 0

Tags