Home Network Community > Range Extenders > 802.11ax only mode doesn't work on RE505X
< Range Extenders

802.11ax only mode doesn't work on RE505X

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

802.11ax only mode doesn't work on RE505X

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
802.11ax only mode doesn't work on RE505X
802.11ax only mode doesn't work on RE505X
2020-12-25 08:56:54
Model: RE505X  
Hardware Version: V1
Firmware Version: 1.0.9 Build 20201013 Rel. 184524

Hello,

 

I have set "802.11ax only" mode on my RE505X in Access Point mode. But more older 802.11ac devices still connect to the AP.

 

@TP-Link could you please take a look? It seems we have a bug here.

 

 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:802.11ax only mode doesn't work on RE505X
2020-12-29 10:11:20

 

Thank you very much for your detailed information.

We would like to forward your case to the senior engineers and please have a check of your email box later.

By the way, what is the model number of this device?

Is it the only device that could connect to the RE505x when it is 802.11ax only?

 

Thanks a lot and wait for your reply.

Deco Monthly Recap- Check What's Currently Going on With Deco
  0  
  0  
#2
Options
Re:802.11ax only mode doesn't work on RE505X
2020-12-29 15:23:36 - last edited 2020-12-29 15:27:52

Thanks  for answering on that.

 

We would like to forward your case to the senior engineers and please have a check of your email box later.

Checked and replied.

 

 

By the way, what is the model number of this device?

Is it the only device that could connect to the RE505x when it is 802.11ax only?

I connected with 2 devices only to make the situation description as simple as possible. But no, that is not only device.

I have several others AC devices and all of them can connect to the access point while it is in 802.11ax only mode. Nintendo Switch, iPad and several more.

 

About the mentioned device with mac address 3c:22:fb:09:f6:cc

This is MacBook Pro (13-inch, 2019, Two Thunderbolt 3 ports) .

With Wi-Fi supported PHY Modes:    802.11 a/b/g/n/ac

 

 

Here are tech specs from the vendor's site - https://support.apple.com/kb/SP799?viewlocale=en_US&locale=en_US

 

  0  
  0  
#3
Options
Re:802.11ax only mode doesn't work on RE505X
2021-02-04 16:49:44

Hello @TP-Link,

I'm wondering if there was any luck on the topic?

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 710

Replies: 3

About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.