archer c50 wifi
hi all
my archer c50 is conect to the main router via ethernet cable now only blink a red light! but i do have internet on the c50.
i diseble the wifi on the main router and only use the wifi from the C50
the speed on the wifi 2.4 is 40-50 and the wifi 5g is 70-80tops
must the wifi 5g be faster?
allready try many ethernet cables , but same red light
the c50 is on bridge mode
thx all
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
How do you connect the C50 to the main router? Is the main router LAN port to the C50 WAN? As this scenario?
What is the internet speed you can get when you connect the computer directly to the main router with cable?
You can refer to this guide to reconfigure the C50 into an access point, then check if there is a difference.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
How do you connect the C50 to the main router? Is the main router LAN port to the C50 WAN? As this scenario?
What is the internet speed you can get when you connect the computer directly to the main router with cable?
You can refer to this guide to reconfigure the C50 into an access point, then check if there is a difference.
- Copy Link
- Report Inappropriate Content
@Kevin_Z on the c50 is connected to the blue port and on the main router is connected to the ethernet port (they are 4 and they look the same)
the internet speed from the main router are
wifi 2.4 up tp 60megas
wifi 5g up to 300megas
i use the tether app ( android) to configure in to bridge mode
- Copy Link
- Report Inappropriate Content
Thanks for getting back with the details.
You can refer to this guide to reconfigure the C50 into an access point, then check if there is a difference.
- Copy Link
- Report Inappropriate Content
@Kevin_Z still got the red light from the cable (tp link cable to the main router)
the speed is better now
still dont have the internet light on the tp link but i do have internet via the wifi from the tp link
- Copy Link
- Report Inappropriate Content
If you configured the C50 into access point mode manually by referring to my previous post, the C50 should connect to your main router via LAN-LAN, but not LAN-WAN anymore, so there is no internet light anymore. Please confirm again.
- Copy Link
- Report Inappropriate Content
"If you configured the C50 into access point mode manually by referring to my previous post" yes i did
LAN1:100Mbps full duplex on tp link
lan on main router
thx for the help
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z yep. speed are good
but the internet light still is off on the tplink (maybe the light is broken)
but speeds are good. wifi is good!
so all good!
thx for the help
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1212
Replies: 10
Voters 0
No one has voted for it yet.