AV600 WPA4220 Kit Adaptor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AV600 WPA4220 Kit Adaptor

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AV600 WPA4220 Kit Adaptor
AV600 WPA4220 Kit Adaptor
2021-01-02 10:13:21
Model: TL-WPA4220 KIT  
Hardware Version: V4
Firmware Version: 4.1

My issue is that the Powerline adaptor does not connect to the Tp Link router anymore  (Model TD-W8970)

 

I've tried different ethernet cables  and the routers LAN ports .

 

Is this a hardware or firmware issue.

 

Thanks

  0      
  0      
#1
Options
1 Reply
Re:AV600 WPA4220 Kit Adaptor
2021-01-02 13:37:46

@MDCass 

 

Hey

 

Would you be able to provide some more details on the issue?   What is your setup and are you able to ping the router?  Does the client device connected to the 2nd wifi plug receive an IP address ok?

 

The base plug (non wifi) is a dumb device and does not require any IP configuration, the wifi plug however requires an IP address, this should be your starting point to diagnose this issue.    Using the TP PLC app via a connected desktop may also help you identify the issue, if you plug the laptop/desktop with the app installed directly into the WiFi plug you should see it and hopefully both app.. if you just see the one adaptor its likely not communicating via the powerline.

 

 

  0  
  0  
#2
Options