wds TD-W9970 v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

wds TD-W9970 v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
wds TD-W9970 v3
wds TD-W9970 v3
2021-01-09 10:11:42 - last edited 2021-01-12 03:35:31
Model: TD-W9970  
Hardware Version: V3
Firmware Version: 20.08.05.01006

Turktelekom company gave the modem.

Now I want to use this modem as a wireless extender.

I cannot update firmware.

There is no WDS menu.

There is no firmware update menu. How can I access the WDS menu.

model no: TD-W9970 v3 00000001

 

I can bridge it with a LAN cable. But I don't want to use cables. 

 

Thanks

 

  0      
  0      
#1
Options
8 Reply
Re:wds TD-W9970 v3
2021-01-09 14:41:31 - last edited 2021-01-12 03:35:31

@safaka 

 

If it's not with a custom FW provided by your ISP these settings should be located as follows:

 

Enable WDS

 

 

FW upgrade

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:wds TD-W9970 v3
2021-01-09 15:36:57 - last edited 2021-01-12 03:35:31

@Ivaylo 

Thanks.
I changed the config file. Now I'm connecting with my root password. But I can't see the WDS menu. as in your pictures. I think I should change the firmware.
Which firmware should I choose is based on my hardware version. Do you have any knowledge about this topic. hardware version is available on my share.

 

 

  0  
  0  
#3
Options
Re:wds TD-W9970 v3
2021-01-09 15:40:52 - last edited 2021-01-12 03:35:31

@safaka 

 

If you are with EU firmware then check this link.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:wds TD-W9970 v3
2021-01-09 16:05:29 - last edited 2021-01-12 03:35:31

@Ivaylo 

Thanks for quickly answer. 
Is it enough if I just install the below firmware. I'm asking for the first time I'm going to install firmware. sorry.

  0  
  0  
#5
Options
Re:wds TD-W9970 v3
2021-01-09 16:12:08 - last edited 2021-01-12 03:35:31

Just look at bottom of your device - there should be a sticker - check the version. If it says (EU) and HW v3, then you can go ahead with the latest from 2020-03-10.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:wds TD-W9970 v3
2021-01-09 16:42:47 - last edited 2021-01-12 03:35:31

@Ivaylo 

I tried two firmwares. But not accept.

modem gave  the message.

 

Error Code: 4503

Uploaded file was not accepted by the device.

I used Lan cable. not wirelewss network. 

modem label is 

  0  
  0  
#7
Options
Re:wds TD-W9970 v3
2021-01-09 16:56:57 - last edited 2021-01-12 03:35:31

@safaka

 

 

Even that the model and HW version are correct It looks like you have a customized FW uploaded on the device by your ISP (TurkTelekom).

Hence the reason it won't accept the stock FW from TP-Link.

What is your primary device router/modem ?

If you can use the TD-W9970 as a primary device and your other device with WDS, that's an option too.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#8
Options
Re:wds TD-W9970 v3
2021-01-11 16:14:28 - last edited 2021-01-12 03:35:31

@Ivaylo 

Thanks for the your solve idea.  you are right. Turktelekom firmware is not accept original firmware. also hardwire is not included WDS. I opened WDS menu but can't receive wireless signal. not shown wireless signals. it only use output wifi signal.

 

 

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1994

Replies: 8