Is it possible to connect a range extender to a powerline set-up

Is it possible to connect a range extender to a powerline set-up
Is it possible to connect a range extender to a powerline set-up
2021-01-19 19:10:28 - last edited 2021-01-21 06:18:24
Model: RE450
Hardware Version:
Firmware Version:

Hi

I have a Powerline extender set-up (WPA4220) to my router via a PA4010 adapter. Is it possible to intregrate my RE450 extender into this set-up so that it receives the signal from the adapter, rather than simply replicating the weak WiFi signal, or is it not built to do that?

Thank in advance for any assistance/advice you can offer.

Best wishes,

Chris

0
0
#1
Options
1 Accepted Solution
Re:Is it possible to connect a range extender to a powerline set-up-Solution
2021-01-21 06:18:18 - last edited 2021-01-21 06:18:24

@CLA 

Hi, it is ok to use the RE450 to extend the wireless signal of the TL-WPA4220.

But since the TL-WPA4220 is 2.4ghz only, it is suggested to enable the high speed mode of RE450 and choose 2.4ghz to the router, 5ghz to the client;

 

Thank you very much.

Recommended Solution
0
0
#2
Options
1 Reply
Re:Is it possible to connect a range extender to a powerline set-up-Solution
2021-01-21 06:18:18 - last edited 2021-01-21 06:18:24

@CLA 

Hi, it is ok to use the RE450 to extend the wireless signal of the TL-WPA4220.

But since the TL-WPA4220 is 2.4ghz only, it is suggested to enable the high speed mode of RE450 and choose 2.4ghz to the router, 5ghz to the client;

 

Thank you very much.

Recommended Solution
0
0
#2
Options