Deco M4 - Netflix stops streaming on smart TV
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Installed the 3 pack M4 few days ago and everything seems fine except one, extremely annoying, thing: Netflix on a Samsung smart TV stops streaming after 5 minutes from when I hit the play button on the remote. I get a tvq-pb-101 (3.1.-82) error code, which means you'll need to disconnect the TV from power in order to resolve this.
Youtube and all other content of TV don't have any problem. Even after Netflix stops, I can switch to Youtube and stream there. TV also indicates it's connected to the network while Netflix stopped working.
The system is in router (not AP) mode, and that's about all I know regarding configuration.
Please help!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Asaft I have the same problem with my Deco E4,I've been using it for almost a year then suddenly this afternoon netflix stopped working/ can't be accessed in router mode, In AP mode on smart TV does not work.
- Copy Link
- Report Inappropriate Content
Hi, thanks for your patience.
We would like to forward your case to the senior engineers and could you please help me check the following information:
- Except the smart TV, are you able to access the Netflix via mobile phone and laptop?
- Have you set up any parental control on the Deco M4?
- Is there any change recently, like a firmware update?
- If you follow the notice on the TV and reboot the smart TV, would Netflix start working again?
Thank you very much and wait for your reply.
- Copy Link
- Report Inappropriate Content
Hi,
Thanks for your reply. Here are the details:
TP-Link wrote
- Except the smart TV, are you able to access the Netflix via mobile phone and laptop?
Netflix works fine on other devices (iPad, iPhone) while connected to Deco.
TP-Link wrote
2. Have you set up any parental control on the Deco M4?
No
TP-Link wrote
3. Is there any change recently, like a firmware update?
I only have Deco installed for about 1 week now. The problem occurred straight out of the box, and continued after updating the FW to the latest version (1.4.3 build 20200918 Rel. 74289).
TP-Link wrote
4. If you follow the notice on the TV and reboot the smart TV, would Netflix start working again?
After rebooting the smart TV, Netflix would start streaming again, and will stop exactly after 5:50 minutes of streaming, display 'loading 25%' for about a minute, and then display the error. This will happen after every reboot.
The TV is still connected to the internet (Youtube works).
Thanks.
- Copy Link
- Report Inappropriate Content
Thanks for your reply.
Could you please try to change the DNS server on the Deco to have a look?
--it is under More>advanced>IPV4>Dynamic IP>Primary DNS/Secondary DNS;
And if possible, please try to turn off the fast roaming, beam forming on the Deco APP and Mesh Technology under the device settings of the smart TV to see if these made any difference;
Thank you very much and wait for your reply.
- Copy Link
- Report Inappropriate Content
Can you recommend a primary / secondary DNS to input?
Please let me know and I will try the suggested actions.
- Copy Link
- Report Inappropriate Content
@Asaft Turn off beam forming. Reboot decos. Worked for me.
- Copy Link
- Report Inappropriate Content
Thanks @MrLoz. Beam forming was already disabled. I pretty much gave up. Got my old router back on to support the TV.
- Copy Link
- Report Inappropriate Content
download netflix mod apk techbigs to fix this problem
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4421
Replies: 8
Voters 0
No one has voted for it yet.