RE200 connected to another RE200 via Ethernet

RE200 connected to another RE200 via Ethernet
RE200 connected to another RE200 via Ethernet
2021-02-03 21:11:52
Model: RE200
Hardware Version:
Firmware Version:

Hi Guys,

 

I wanted to see if it's possible to connect two RE200's connections via Ethernet cable.

 

I have a bar in the garden which is about 80 metres away from the house. I wondered if I can connect one RE200 to the main router wirelessly, but then can I connect an Ethernet cable in to that plug and connect the cable to another RE200 in bar which has also been configured with the main router settings? 

0
0
#1
Options
2 Reply
Re:RE200 connected to another RE200 via Ethernet
2021-02-06 07:16:58

@Michaelleachman 

Hi, it is ok for your setup.

But if you haven’t bought two RE200s already, you could consider our business access point, like EAP225-outdoor:

 https://www.tp-link.com/business-networking/solution/

https://www.tp-link.com/business-networking/omada-sdn-access-point/

Thank you very much and wait for your reply.

0
0
#2
Options
Re:RE200 connected to another RE200 via Ethernet
2021-02-06 11:28:15

 

TP-Link wrote

@Michaelleachman 

Hi, it is ok for your setup.

But if you haven’t bought two RE200s already, you could consider our business access point, like EAP225-outdoor:

 https://www.tp-link.com/business-networking/solution/

https://www.tp-link.com/business-networking/omada-sdn-access-point/

Thank you very much and wait for your reply.

Yea I have already got the RE200, but for some reason, the method I have mentioned isn't working for some reason @TP-Link 

0
0
#3
Options