Deco M9 V2 very unstable after upgrade to 1.5.0 42330
Deco M9 V2 very unstable after upgrade to 1.5.0 42330
After upgrade to firmware 1.5.0 my Deco M9 network is very unstable. Satellites are continuously dropping from main Deco.
Until this latest upgrade I never have had any connection issues, network was very stable. The biggest problem is that I can't downgrade to firmware 1.4.3 anymore, this is not supported.
Will there be a new stable firmware available asap?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Hi, I have the same problem. Noticed that my speed have dropped in large difference after I updated the firmware. Where can i find the latest firmware for Deco m9 plus 1.5.1. Cant seems to find in yoour website.
TQ
- Copy Link
- Report Inappropriate Content
Hi, here is the latest firmware 1.5.1 for Deco M9 plus V2 and some regions has not added the latest firmware yet:
https://static.tp-link.com/2021/202102/20210203/Deco_M9Plus_V2_1.5.0_201211.zip
Thank you very much.
- Copy Link
- Report Inappropriate Content
The same issue here, with V1. Almost never had any issues up to 1.4.3, worked all the time without problems or interruptions.
Now after upgrade to 1.5.1. it's a total disaster for working from home. I wish I read this thread before accepting the update.
Satellites keep dropping offline and need to be rebooted. The whole thing virtually useless now and makes working from home a real struggle!
Tried to manually downgrade to 1.4.3, without success. The system lets install 1.5.0 to replace 1.5.1 but this did not seem to do the trick. Would it be somehow possible to roll back to the last working version 1.4.3.?
My setup is Deco M9plus, v1, 3, three deco discs in different rooms. Main deco directly wired to the broadband router.
I will be happy to provide logs etc by email to get this sorted.
The 1.5.1 update ruined a perfectly running system.
- Copy Link
- Report Inappropriate Content
@TP-Link experiencing this issue as well - all satellites go red after 30-60 minutes - the main deco works fine. Rebooting the main deco will bring all the satellites online again for a while, but after another 30-60 mins they go offline again. Using firmware 1.5.1 on all units.
Topology is 4 Deco M9+ v2.0 on four different floors. Main Deco on 2nd floor.
- Copy Link
- Report Inappropriate Content
Deco M9 Plus(EU) v2 with main unit and one satellite has worked fine for several weeks with the latest firmware 1.5.1. All the sudden the satellite started losing the wireless connection with the main unit. The satellite might blink red or it might be steady green, but there's no connectivity. A reboot or reboots of the satellite or both units helps for an hour or so. Then the same issue returns. I wonder why this started all the sudden. The devices were not moved or anything.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank you very much and we have forwarded your case to the senior engineers already;
Please have a check of your email box;
Thanks.
- Copy Link
- Report Inappropriate Content
@Chris_Le are you aware if Is there an update on the next firmware OR is there a work around to solve this while we wait?
- Copy Link
- Report Inappropriate Content
@TP-Link - Is there an update to when a new stable firmware will be ready? Is there a work around while I wait? My children are losing their minds with the instability.
- Copy Link
- Report Inappropriate Content
@JulesLA I have been running 1.5.3 for a while and for me it has been stable.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 2542
Replies: 20