Archer C6 losing internet connection
Archer C6 losing internet connection
Hello,
After recently upgrading the firmware version to the latest one my router keeps losing internet connection to the 2.4 network and all my smart devices have to be manually reconnected every few hours. This does not seem to affect the 5G network or the LAN devices, they work perfectly fine. I am in no way an expert so I am going to try my best to explain the behavior I have observed so far:
1.The 2.4 network keeps broadcasting but device are unable to connect to the internet ( like unplugging the LAN cable from your ISP from the back of the router but leaving the router on )
2. Rebooting the smart devices does not fix the issue as they still cannot connect to the network
3. Rebooting the router sometimes works, sometimes it does not
4. I use a Fiber-optic connection and the router is connected to another router provided by the ISP. I am not sure if this could cause the problem as the 5G connection and the LAN works perfectly fine but thought I should mention
So after searching the forums and trying various fixes here's what I have tried until now:
1. Rebooting the Router
2. Backup & factory resetting the router
3. Using a WiFi analyzer and setting the channels to the clear ones, also setting the transmitting power to max and channel bandwidth to max. (This did not work so I have reverted to AUTO )
4. Upgrading my firmware to a beta version 1.3.6 Build 20200819 rel.50735(4555)
5. Disabled Smart connect
Do you guys have any idea if this is related to the firmware version or is a hardware version? Also if it is firmware version do you have a previous build (2020) I could restore to as I am unable to find a list with previous firmware versions on TPLink's website
Also do you have any more tips I could try as I am working from home and my work Optiplex is using the 2.4 Connection so getting disconnected every few hours is becoming extremely infuriating and it is compromising my work.
PS: I have the EU V2. hardware version
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Kevin_Z
Thank you for your quick response.
My ISP claiming there was no issue on my line, another technician who was at my flat was finding a faulty Ethernet port on the cable modem.
So the issue was on the ISPs side, I got a replacement unit and since 28 hours I'm online without a single lost ping or disconnect.
I did not upgrade to the beta firmware (yet) to be sure that the problem was the modems eth0 port for about another week, logging ping on a raspberry pi 24h/day.
Kind regards.
- Copy Link
- Report Inappropriate Content
If your FW version is an EU, here's the list of FW releases.
Have you tried the beta FW from this thread ? (it's in the Recommend Solution post by Kevin_Z)
You can revert from beta to the one on top of the list for sure.
When changing the FW version it's advisable to hard reset (Method 1) the device and reconfigure from scratch.
- Copy Link
- Report Inappropriate Content
@Ivaylo I have tried the previously released version Archer C6(EU)_V2_20090 as well as the beta version For Archer C6EU V2: https://static.tp-link.com/2020/202010/20201030/ArcherC6v2_eu-up-ver1-3-6-P1[20201030-rel60104].zip and have experienced much fewer network crashes but they do still happen.
Also, I have performed a factory reset after installing each version.
Is it safe to consider that at this point this might be a hardware issue?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
When the smart devices lose the 2.4G connection, and they failed to reconnect, what is the error message? Can they still find the 2.4G network in the Wi-Fi list?
May I know the detailed Wireless Security setting on the C6? You may cover the SSID and password for any security concerns.
How many devices are connected to C6 2.4G network? What are they?
How often does this disconnect issue happen?
- Copy Link
- Report Inappropriate Content
Hello,
The 2.4G network is visible and my devices usually give the " Unable to connect to the network" error. Once my iPhone was unable to connect and the error mentioned to check the DHCP setting but I cannot recall the exact error message.
I have two light strips, two light bulbs, and two Echo Dots also some smart panels from Nanoleaf. So that comes to about 10-12 devices.
Edit: The devices disconnect at least once every 24 Hrs but it's pretty random. They do remain connected for some time after rebooting but not more than 6-8 hours
Here are some snips:
- Copy Link
- Report Inappropriate Content
We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue.
- Copy Link
- Report Inappropriate Content
Losing WAN connection regularily (5-20x a day I run into it, I suppose it happens more often).
When connected to ISP modem directly no disconnects happen.
Hardware: Archer C6(EU) v2.0
Firmware Version: Latest official: 1.3.6 Build 20200902 rel.65591(4555)
My PC is connected via ethernet cable, as well as a HP printer and two Raspberry Pi's.
One TP-Link Tapo C100, an iPhone, an iPad and two Sonos Wireless Speakers are connected via 2.4 GHz and 5 GHz Wifi.
No Guest-Wifi, no QoS, no Parental Controls, SPI firewall active (default setting), NAT forwarding: 4 virtual server rules active, OpenVPN VPN-Server active
I already did a factory reset, nothing changed.
I see that for the US-Version of the router there is an update available (Archer C6(US)_V2_210226 - https://www.tp-link.com/us/support/download/archer-c6/#Firmware ) that has a description like "Fixed the bug that unstable WAN connection under certain circumstances".
Can you please, please, also fix that issue for the EU-version?
This is becoming very annoying for me and happening more and more often.
Attached you will find a ping result file. I "masked" my IP-Addresses for security reasons.
You will still see the behaviour.
Also attached you find a screenshot of my router's webpage when the error occurs.
I ran a second computer straight from the ISP modem from its second eth-port. There I had _no_ lost connection over the whole time period when I was monitoring on this second computer.
In the near future I want to expand with a RE300 mesh-repeater that was recommended to my by your support. I already bought it. So deactivating mesh is no solution to me (in case this is the issue). Since the US-Version has an update it should also be possible for the EU-Version, right?
I don't want to put OpenWRT firmware on it and also not throw it in the bin, since I like the router very much as it is except this bug.
Thank you for your help.
- Copy Link
- Report Inappropriate Content
Hello @lordhenry, I think the issue you are reporting has been discussed via email, please confirm if it helps.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z
Thank you for your quick response.
My ISP claiming there was no issue on my line, another technician who was at my flat was finding a faulty Ethernet port on the cable modem.
So the issue was on the ISPs side, I got a replacement unit and since 28 hours I'm online without a single lost ping or disconnect.
I did not upgrade to the beta firmware (yet) to be sure that the problem was the modems eth0 port for about another week, logging ping on a raspberry pi 24h/day.
Kind regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2516
Replies: 11
Voters 0
No one has voted for it yet.