WAN(LAN port) Mac Address
Hi,
please how can I find out mac address of LAN port 1&2 on my Deco X60.
Thank you :)
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Elementary. :)
1. MAC address on a sticker at the bottom of Deco unit, if it has one
2. If this is Satellite Deco, connect it by the Ethernet cable to Main Deco and check what MAC address it reports for that node in Deco app
3. If this is Main Deco, see what MAC address is reported in ISP router it is connected to by Ethernet cable
- Copy Link
- Report Inappropriate Content
Hi, is there any special reason that you wanted to find out the MAC address of the different port of Deco X60?
Thank you.
- Copy Link
- Report Inappropriate Content
@TP-Link Hi
I have same question. The reason could be many. For me it is that that I want to lock the DECO's WAN IP in my ISP router for port forwarding reasons.
Other reasons could be that the ISP simply require it if you ask them to be in bridging mode.
The MAC should be easily displayed somewhere, we shouldn't have to rely on using other equipment to find the MAC.
BR
Kim
- Copy Link
- Report Inappropriate Content
Hi, you will see the WAN port MAC address on the web UI(under internet status) of the main Deco.
(Normally, it is based on the MAC address on the bottom label(=the last character of label MAC(hexadecimal)+1).
For the rest of the LAN ports, it is the MAC address of the connected devices, which you could also find on the web UI and the Deco APP.
Please let me know if there is any misunderstanding.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2180
Replies: 4