optimize driver adsl!!!!
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
optimize driver adsl!!!!
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Telecom
Below you point out my attenuation values detected on the modem in question:
Line Status:Connected
DSL Modulation Type:ADSL_2plus
Annex Type:Annex A
Upstream Downstream
Current Rate (Kbps) 476 8124
Max Rate (Kbps) 1048 11512
SNR Margin (dB) 28.4 12.2
Line Attenuation (dB) 17.2 33.4
Errors (Pkts) 0 0
:mad::mad:The part adsl should be revised as the highlighted value and too discordant from the value taken on the same line as route draytek 2800 with attenuation of 24.5 db snr to 16dB :mad::mad:
I'd like to find a job in the next firmware dedicated all'ottimizzare driver adsl modem so is worse than 6 years old
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Telecom
Below you point out my attenuation values detected on the modem in question:
Line Status:Connected
DSL Modulation Type:ADSL_2plus
Annex Type:Annex A
Upstream Downstream
Current Rate (Kbps) 476 8124
Max Rate (Kbps) 1048 11512
SNR Margin (dB) 28.4 12.2
Line Attenuation (dB) 17.2 33.4
Errors (Pkts) 0 0
:mad::mad:The part adsl should be revised as the highlighted value and too discordant from the value taken on the same line as route draytek 2800 with attenuation of 24.5 db snr to 16dB :mad::mad:
I'd like to find a job in the next firmware dedicated all'ottimizzare driver adsl modem so is worse than 6 years old
