Archer AX20 disconnecting issues
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am having some disconnecting issues with my archer ax 20. I recently bought it and I join it and a re200 repeater into a onemesh system and I always face disconnecting issues. Is there a way to solve it. I already disable smart connect and I already update both of the devices firmware to the latest version.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, when you mention you are experiencing some disconnecting issues, can you please confirm how did you notice this, does the RE200 disappear from the "devices in the Onemesh network" and appears in the "Available Onemesh devices" list?
How about the LED status on the RE200 when this issue happens? What if you configure the RE200 to connect to the AX20 in regular range extender mode, will it connect to the AX20 stably.
Please also verify if you can get a stable connection if you remove the RE200 from the network, and only connect to the AX20 wireless. You can try to disable the Smart Connect feature on the AX20, then try to choose a specific wireless channel for the network, check again if the network on the AX20 itself is stable.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
When the phone connects to the RE network, will you be able to do a ping test on it? You can try to ping the IP address of the AX20, which is 192.168.0.1 if you didn't change it; Try to ping 8.8.8.8 if that is good.
Meanwhile, try to connect to the AX20 main network at the same time, check if you still have internet access. As mentioned earlier, please pay attention to the LED status on both the AX20 and the RE200.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 779
Replies: 4
Voters 0
No one has voted for it yet.