v1.1 Firmware for TL-R605?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

v1.1 Firmware for TL-R605?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
v1.1 Firmware for TL-R605?
v1.1 Firmware for TL-R605?
2021-06-29 17:27:08
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: v1.1

@Fae

 

Can you provide an update on a release date for the v1.1 firmware for the TL-R605?  I was experiencing frequent connectivity glitches with my wireless clients (irrespective of SSID, VLAN or AP).  The wireless signal would remain strong, but clients would be unable to reach internal or external hosts, only to resolve a few seconds later.  Very annoying.  I suspected it was a routing issue since it seemed to coincide with an update to v1.0.1 (March 3rd release).  I've since installed the beta version of v1.1 that mentioned and linked to in another thread.

 

It sounds the beta was released as official firmware only to be pulled a few days later.  Can we expect the official update sometime soon along with a list of bug fixes & new features?

  0      
  0      
#1
Options
5 Reply
Re:v1.1 Firmware for TL-R605?
2021-06-29 18:34:12

@TEDC 

Yes they should come with a proper formware for the routers now, there has been a lot of trouble. but your problem is similar to a problem i had before, try setting manual DNS on your LAN interfaces. eg 1.1.1.2 and 1.0.0.2, I do not think auto works so well on the routers, had the same problem on ER7206 and ER605 but not anymore.

 

  0  
  0  
#2
Options
Re:v1.1 Firmware for TL-R605?
2021-07-01 08:27:25

Dear @TEDC,

 

TEDC wrote

Can you provide an update on a release date for the v1.1 firmware for the TL-R605?

 

Sorry that I have no idea about the release date for the new firmware either.

I'll keep an eye on it and update this post once there is new firmware available.

 

I was experiencing frequent connectivity glitches with my wireless clients (irrespective of SSID, VLAN or AP).  The wireless signal would remain strong, but clients would be unable to reach internal or external hosts, only to resolve a few seconds later.  Very annoying.

 

For the connectivity issue, have you tried the suggestion provided by shberge for checking?

 

If it doesn't help, please kindly elaborate on the problem and provide the model and firmware of your EAPs.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options
Re:v1.1 Firmware for TL-R605?
2021-07-02 15:33:31

@Fae thank you.  I am operating with three APs, all with (what I believe to be) the latest firmware:

 

 

@shberge appreciate the suggestion.  So you are recommending that for each interface, I set the DNS type to manual and use the gateway as the Primary DNS entry (no secondary)?  Like so?

 

  0  
  0  
#4
Options
Re:v1.1 Firmware for TL-R605?
2021-07-02 15:48:13

@TEDC 

 

This DNS Settings is tha same as auto. set your ISP DNS or other public dns e.g 8.8.8.8,  or 1.1.1.1, 1.0.0.1 , I use 1.1.1.2 and 1.0.0.2 for mor secure DNS

 

  0  
  0  
#5
Options
Re:v1.1 Firmware for TL-R605?
2021-07-02 16:35:04

@shberge gotcha.  Thanks, I'll give it a shot.

  0  
  0  
#6
Options