Home Network Community > Wi-Fi Routers > [Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
< Wi-Fi Routers

[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
2021-07-23 13:17:05 - last edited 2021-07-29 07:43:46
Model: Archer C7  
Hardware Version: V5
Firmware Version: 1.1.2 Build 20210125 rel.37999(4555)

 

Hi everyone,

 

I am struggling a bit with my Open VPN Connection. I can connect successfully and reach the router (192.168.120.1) itself but when i try to reach one of the devices connected to the lan port (192.168.120.100) i get a timeout every time. When I use the PPTP VPN Server I can connect and reach the lan devices without issues.

 

 

 

 

Open  VPN is configured as follows:

 

 

I already tried to set the guestnetwork setting to allow guests to see the local network and disabled and enabled the firwall ( desperately trying everything )

I also tried both TCP And UDP

 

 

Please note that accessing the Router on 192.168.120.1 always is successful. So the general open vpn connection seems to work fine.

 

It would be great if someone could point me into the right direction.

 

Kind Regards

 

David

  0      
 
  0      
 
#1
Options
5 Reply
Re:[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
2021-07-23 14:51:05

@spooky3do ,

 

Go through this thread and this thread to see if any suggestion could help you with this issue.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
2021-07-23 17:24:38
thanks for your reply, i already checked these threads before posting and did not find anything relevant or helpful for my case.
  0  
  0  
#3
Options
Re:[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
2021-07-28 09:27:42 - last edited 2021-07-29 06:49:49
Ok I assume that this just does not work then. I will try to return it and get another one.
  0  
  0  
#4
Options
Re:[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
2021-07-29 06:54:46 - last edited 2021-07-29 07:01:21

@spooky3do 

 

Hi, if you can ping the router IP from the outside network, that means the settings about OpenVPN on the router is successful, and the router doesn't block anything now. 

 

It is suggested to check and review the firewall settings on this device connected to the lan port (192.168.120.100), try to turn it off, then check again. If that is a Windows 10 computer, you will find the firewall settings under Control Panel > System and Security > Windows Firewall > Select Turn Windows Firewall off > Select OK to save the changes.

 

One more note, you can also check if there is any other anti-virus software running on this 192.168.120.100, such as Bitdefender or Killer, which may also block the access.

TP-Link Annual Community Survey | Help Shape Our Community Throughout 2024!
  0  
  0  
#5
Options
Re:[Troubleshooting] Archer C7 Open VPN allows reaching the router but not the local area network
2021-07-29 07:44:03 - last edited 2021-07-29 07:51:08

Hi Kevin,

 

thanks a lot for your response. I appreciate the time and effort put towards trying to help me.

 

I will check if i can find any settings that can prevent the connection .. Maybe i can setup a route to the open vpn subnet. in my view that should not be needed though because i expect that an answer to a connect is sent to where it was received from by default. 

 

Furthermore I'd like you to note that the connected system on 192.168.120.100 is a very basic linux system for which i am not aware of any firewall and I can reach it without any issues via the PPTP VPN Server which provides an address within the 192.168.120.0 network though while OpenVPN does not.  (Just using that is not an option though because of security and additionally PPTP does not work for a colleague of mine)

 

 

 

 

 

Kind Regards

David

 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 919

Replies: 5

Related Articles
Archer C7 TPLINK DDNS Open VPN
691 0
Open VPN
135 0
Archer C7 - Cannot open FTP port and forward to my PC.
649 0
Archer c7
891 0
Archer C7 AC1750 Log
1000 0
flache Archer C7 V5
263 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.