Home Network Community > Wi-Fi Routers > TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
< Wi-Fi Routers

TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
2021-07-30 13:25:28
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.2.3 Build 20210511 rel.76452

I am trying to do wireless bridging between my main router (Airtel GPON Router) and AX6000 using 5Ghz_WDS. The connection becomes successful and I am also able to use 2.4 Ghz SSID of AX6000 but I am not able to find 5Ghz SSID even though it is different one from the main router.

 

The opposite thing happens when I bridge via 2.4 Ghz_WDS. At that time, 5 Ghz SSID of AX6000 is visible but 2.4 Ghz does not work.

 

LAN connection works perfectly fine.

 

Smart Connect is disabled, DHCP is disabled and Router IP falls in the IP range of the main router but still issue persists.

 

I have rebooted the router and performed factory reset as well but issue still persists.

 

Mailed the issue to TPLink customer care but no response.

 

Can anybody help?

  0      
 
  0      
 
#1
Options
6 Reply
Re:TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
2021-07-30 14:54:51 - last edited 2021-07-30 16:52:21

@ZSON 

 

You may test ths solution and check if it helps.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
2021-07-30 15:59:43

@terziyski 

 

Once you bridge wirelessly, u wont have any option to change the channel in the 2nd router and the main router is already set to channel 36.

 

I think the issue is with the firmware.

  0  
  0  
#3
Options
Re:TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
2021-07-30 16:40:27 - last edited 2021-07-30 16:54:42

@ZSON 

 

The idea of the solution is before building WDS, to set the host device (Airtel GPON Router) on U-NII-1 band (choose one of these channels 36/40/44/48) reboot both devices, then build WDS.

When you're on the channel 36 (on host device) the extended device (AX6000) will try to build the WDS on that channel.

If it doesn't work for you and judging by your description that on 2.4GHz band is the same then @Kevin_Z may advise you further.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
2021-08-02 02:30:28

@terziyski  Thank you for tagging for attention.

 

I would say, this is the firmware design that the router would use one frequency to link to the main router, and leave the other for the client devices to connect.

 

BTW, the AX6000 is mainly designed to be working as the main router, bridging with another wireless network would not be the recommended feature.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
2021-08-02 13:02:29

@Kevin_Z 

 

Hi Kevin:

 

In that case, wont the speed differ? If you connect to 2.4 Ghz, u generally get 1/3 of yor speed so whats the point in implementing this solution.

 

Yes, I was also using AX6000 as my primary router when I had PPPoE connection but now I am using DSL connection and the Broadband provider has provided a GPON router. 
 

Regards

ZSON

  0  
  0  
#6
Options
Re:TPLink AX6000 5Ghz SSID not visible when connected to main router in 5Ghz_WDS mode
2021-10-17 20:15:37

I too had the same problem, for some reason 5Ghz WDS was not working, survey to check nearby 5Ghz result in 0 devices, had to change channel to 36 to successfully connect, but when connected to Nokia modem I got no internet, I even have Tenda router configured as WDS connected to my main router(Nokia), even connected to Tenda, viola WDS working on 5Ghz.

 

Setup configured:-

Nokia router -->Tenda Router --> Tp Link Router

 

All Above connections are configured in 5Ghz.

 

Best,

Armaan

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 964

Replies: 6

Related Articles
5ghz is not visible
220 1
Intermittent internet dropouts on the TPLink AX-6000
21983 1
 AX6000 Device not in DHCP but connected
339 0
 Ax6000 5ghz stops working
1673 0
 5ghz wifi on ax6000 does not work
1498 0
 Shutting down the 5GHz channel on the AX6000
1017 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.