ax 73 need firmware uprade
please kindly check this version needs firmware uprade
incoorect password error not connecting
after add / delete mac id then after reboot only it is connecting
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
That's great to know it works.
For anyone else who may encounter an issue with the wireless connection, it's suggested to upgrade the router firmware to the latest version, which is now 20210717, you can check on the Tether app or on the router web GUI for new firmware.
If you cannot detect the new version now, please wait one day or two, and pay attention to the official website, there will be published later:
https://www.tp-link.com/support/download/archer-ax73/v1/#Firmware
- Copy Link
- Report Inappropriate Content
@aarreddy Thats not very descreptive of the issue...
What incorrect password? WiFi or webUI ?
And if you have set ACL with MAC or DHCP Reservation... how do you expect to connect, if its wrong?
- Copy Link
- Report Inappropriate Content
very simple it is connected working fine
some time is disconnected or reconnect to wifi incorrect password error
- Copy Link
- Report Inappropriate Content
@aarreddy
So, the issue is, that your mobile device (phone or laptop), randomly gets dropped from the Wi-Fi, and you are required to input the Wi-Fi password again?
Are you sure, the issue is the device not actually remembering the Wi-Fi password?
And does this happen on both 2.4Ghz and 5Ghz SSIDs? In what mode are you running them, are they with the same SSID?
And you can check and provide logs from the router, when the issue occures.
- Copy Link
- Report Inappropriate Content
without smart
see think today it is connecting all id and password saved and working
say next day you power the router this time says inccorect password why?
also somtimes it cannot coonect wifi whereas other devices on same network are connected
this incorrect password error comes when other devices on same network and working
- Copy Link
- Report Inappropriate Content
@aarreddy
If you are not using Smart Connect, then make sure that both 2.4Ghz and 5Ghz networks use the same password and settings.
If the SSIDs are the same, but the passwords are different (or the security method is not the same WPA2 vs WPA3 for example), this could be the reason.
- Copy Link
- Report Inappropriate Content
Hi, sorry for jumping in.
Just to confirm, have you enabled Access Control on the AX73? You can check if the firmware we provided here will help:
[Solution] Cannot connect to Archer AX73 network after enabling Access Control Whitelist
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
DISABLED Smart Connect, then make sure that both 2.4Ghz and 5Ghz networks SSID ARE DIFFERENT
.WPA2
AES
- Copy Link
- Report Inappropriate Content
You can install the firmware we provided, then confirm if the issue persists.
BTW, are all devices experiencing the same issue, or some specific devices? What are those devices?
- Copy Link
- Report Inappropriate Content
they working on this new firmware is out
they should get more firmware updates pls check on stabilty issues
thanks all
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2895
Replies: 21
Voters 0
No one has voted for it yet.