Solution VR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
have already post about this problem in this thread, but probably is better to create a new one since we are talking about a different model.
Problem is that after ~ 12 hour of work the Errors (pkts) count moves from zero and goes wild (after this night was around ~1200000 ).
The speed of download bitrate dramatically start to decrease as well.
The only 2 found solution is either to restart the modem or unplug and replug the vdsl cable to reset internet connection.
after a reboot the situation is this one [ full performance in pagespeed (40 mbps down, 7.7 mbps up) ]
After ~12 hours the errors start to spawn and the download rate decreased to less than 4 mbps download (!!), upload value is the same.
Other Notes:
Am not using any telephone nor dsl filter, just the vdsl cable connect directly to the router.
The problems happens also for my ethernet connected Desktop PC (errors pkts + download speed drammaticaly decreased)... this is definitely not only a WiFi issue.
Seems also that this problem happens also for different model of tp-link modem router eg:
https://community.tp-link.com/en/home/forum/topic/243294
https://community.tp-link.com/en/home/forum/topic/263338
https://community.tp-link.com/en/home/forum/topic/271298
https://community.tp-link.com/en/home/forum/topic/209588
https://community.tp-link.com/en/home/forum/topic/240008
In none of these thread there is a solution.
Can anyone help me?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
So I installed back the beta firmware and the problem solved after my ISP fixed the landline phone booth (I guess it was wired cables problem not sure), 3 days with no errors until now. Thank you David if something occurred I'll email support for sure.
- Copy Link
- Report Inappropriate Content
when are they going to release firmware to fix this? vr400 v3 high down stream errors
- Copy Link
- Report Inappropriate Content
@router777 I have just installed a new firmware version 1.6.0 yesterday.
- Copy Link
- Report Inappropriate Content
Hi, I have the same problem, and the only solution I found is using the firmware version 1.3 (I am stuck at this version), all other firmware versions generates line errors and Internet drops down immediately after using it at full speed ( downloading a big file for example).
With version 1.3 Internet dont drop even after a week or more.
1. Archer VR600 V3 (firmware ver 1.3 stable) all other firmware versions including beta failed
2. ISP : Algerie Telecom (Algeria) I dont know witch DSLAM but probably HUAWEI
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
HI
This problem is also present in my TD-W9960 V1.2 modem
Another problem I have is that the hardware version written on the body of the modem is different from the version displayed on the settings page
(on the body of the modem: TD-W9960(EU) VER:1.20)
(on the settings page: TD-W9960 v1 00000000)
Also, I cannot install any of the upgrade versions of this model
(error 4503 the uploaded file was not accepted)
These problems have become very annoying, please help
Thanks.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Is there a Beta FW update for the VR300 V2.0?
I cannot even get through 15mins before the router drops the connection. Pretty dissapointing.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 29900
Replies: 127
Voters 1
