Solution VR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically
![](/avatar/avatar-12.png)
Hello,
have already post about this problem in this thread, but probably is better to create a new one since we are talking about a different model.
Problem is that after ~ 12 hour of work the Errors (pkts) count moves from zero and goes wild (after this night was around ~1200000 ).
The speed of download bitrate dramatically start to decrease as well.
The only 2 found solution is either to restart the modem or unplug and replug the vdsl cable to reset internet connection.
after a reboot the situation is this one [ full performance in pagespeed (40 mbps down, 7.7 mbps up) ]
After ~12 hours the errors start to spawn and the download rate decreased to less than 4 mbps download (!!), upload value is the same.
Other Notes:
Am not using any telephone nor dsl filter, just the vdsl cable connect directly to the router.
The problems happens also for my ethernet connected Desktop PC (errors pkts + download speed drammaticaly decreased)... this is definitely not only a WiFi issue.
Seems also that this problem happens also for different model of tp-link modem router eg:
https://community.tp-link.com/en/home/forum/topic/243294
https://community.tp-link.com/en/home/forum/topic/263338
https://community.tp-link.com/en/home/forum/topic/271298
https://community.tp-link.com/en/home/forum/topic/209588
https://community.tp-link.com/en/home/forum/topic/240008
In none of these thread there is a solution.
Can anyone help me?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
We are still havign these issues with high stream errors. when will there be a fix? this has been going on for months now.
- Copy Link
- Report Inappropriate Content
Hi
I have bought the modem vr400 v3 for 1 week and I am facing the following problems
Firmware 1.3 is facing problems. When the number of errors increases, the SNR value starts to decrease, then the connection speed of the link starts to decrease and the line speed decreases to 50% and continues until the Internet is disconnected and the Internet is not connected until the modem is restarted. also link jumped for many times
Firmware 1.5 has reduced the problem, but there is a link jump, that is, the DSL light turns off, and when the link connection is reconnected, the modem does not connect to the Internet until the modem is restarted.
Also, the amount of SNR in firmware 1.5 is reduced compared to firmware 1.3, and the number of link jumps in firmware 1.5 is extremely high, and sometimes we have link jumps every 10 minutes. My previous modem was model 8901g v6 and it works better than this model.
Unfortunately, I regret my purchase because I thought the problems were solved, which I thought was completely wrong.
If I had bought an asus modem instead of this model, I would have had a very stable connection Please solve the SNR value and the error pks problems
Beta firmware doesn't help at all and version 1.5 is better than beta firmware
As shown in the figure, the device was restarted 20 minutes ago
If a customer who has been using your products for 15 years is important to you, solve the problem of this model
- Copy Link
- Report Inappropriate Content
I have a problem very similar.
I bought a new router, VX230v for a couple of days, however I am having problems with connection degradation. Apparently the ADSL is active and also the name resolution (traceroute does its duty) but the connection speed measured for example at https://www.speedtest.net/ is almost zero in download while in upload it is significant). In practice, web browsing is impossible. After a router reset the situation returns to normal with a down rate of 56 Mbips but within an hour it sometimes drops to zero.
The firmware is up to date. I have only a few dozen downstream errors.
It seems like a classic black internet problem but a reduction of the packets size seems to be just a bribe.
- Copy Link
- Report Inappropriate Content
I believe there is something wrong with Archer vr400 V3. I have tried updating the firmware and everything suggested in forums like changing the frequency channel. I still get SNR drop and Errors (pkts). The errors gradually increase and after a week i get about 1200 errors. It's annoying because it effects the speed by dropping SNR. I thought buying a new router will help me have a better access to the internet, While my previous router did not have such an issue and never got any pkts errors and stuff. I regret buying this router. I hope with next frimwares they solve the problem.
- Copy Link
- Report Inappropriate Content
I have the same problem with Archer VR2100 v1 (Latest firmware 1.6.0 0.9.1 v009e.0 Build 220518). After a few hours, downstream errors spike and the speed drops dramatically. A reboot fixes it and then the same problem happens again. I bought a second VR2100 and it has the exact same problem. Is there any firmware that works well? Or how to solve it?
- Copy Link
- Report Inappropriate Content
@L.Na. I also have the same problem with the same device and firmware. Only reboot helps. I set in administration to reboot the device every day, but sometimes it need more than one reboot per 24 hours. Quite disappointing with device in this price range.
- Copy Link
- Report Inappropriate Content
I seem to be having the same problem after 24-48 hours. The connection slows down a lot, takes longer to get from webpage to webpage. Sometimes stops working completely but a reboot fixes it. Noticed a high number of errors before rebooting. Using a VR2100 v1, FTTC.
- Copy Link
- Report Inappropriate Content
I am using TpLink Archer VR2100 (EU) v1 and I have the exact same problem. Works perfectly for a while and then bam, high error (pkts) and download speed falls to maximum 1Mbps. I am from Turkey and I use Turk Telekom as ISP. Firmware: Archer VR2100(EU)_V1_1.6.0 Build 220518.
- Copy Link
- Report Inappropriate Content
Anyone Who was success to solving the problem with beta sw?
I can't see any new release for other models and how it seems tplink support stopped communicating as well.
WiFi part of modem/router is running really well, but DSL is unusable when need to restart every 12-24h to get whole bunch of speed of my ISP
- Copy Link
- Report Inappropriate Content
Issue was caused by enabled SRA (advance / dsl settings) on ISP site and disabled on mine. I just enabled it on my place and confirm with provider he can see it as well.
I'm errors free now for 24h, before I was failing after 12h.
- Copy Link
- Report Inappropriate Content
![](/avatar/avatar-12.png)
Information
Helpful: 5
Views: 27516
Replies: 127
Voters 1
![voter's avatar](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)