Solution VR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically
Hello,
have already post about this problem in this thread, but probably is better to create a new one since we are talking about a different model.
Problem is that after ~ 12 hour of work the Errors (pkts) count moves from zero and goes wild (after this night was around ~1200000 ).
The speed of download bitrate dramatically start to decrease as well.
The only 2 found solution is either to restart the modem or unplug and replug the vdsl cable to reset internet connection.
after a reboot the situation is this one [ full performance in pagespeed (40 mbps down, 7.7 mbps up) ]
After ~12 hours the errors start to spawn and the download rate decreased to less than 4 mbps download (!!), upload value is the same.
Other Notes:
Am not using any telephone nor dsl filter, just the vdsl cable connect directly to the router.
The problems happens also for my ethernet connected Desktop PC (errors pkts + download speed drammaticaly decreased)... this is definitely not only a WiFi issue.
Seems also that this problem happens also for different model of tp-link modem router eg:
https://community.tp-link.com/en/home/forum/topic/243294
https://community.tp-link.com/en/home/forum/topic/263338
https://community.tp-link.com/en/home/forum/topic/271298
https://community.tp-link.com/en/home/forum/topic/209588
https://community.tp-link.com/en/home/forum/topic/240008
In none of these thread there is a solution.
Can anyone help me?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Stefano_________ هل من تحديثات ايام قادة ل vr300 v1.20 لحل مشاكل تقطعات والمشكل في احهزة tplink فقظ وشكرا
- Copy Link
- Report Inappropriate Content
Thanks for sharing your experience with the Archer VR300. Download bitrate dropping after prolonged usage Child Recovery. Restarting the modem or resetting the internet connection seem to be temporary fixes.
- Copy Link
- Report Inappropriate Content
What i found is that this modem is super sensitive to any electical interference. I had to move it as close as possible to main dsl connector in house, shorten all cables and add ferrite coreres to all cables. Then it works perfectly without any issue. I didn't have this issue on same cables with old Zyxel.
Another thing i received from our Czech TPLink support is to Enable "SRA" in advanced DSL config.
I hope this will help to others also :-)
- Copy Link
- Report Inappropriate Content
http://prntscr.com/pRNPu-CCwjQB
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, since the downstream errors is less than 100000, it is not the same problem, please start a new thread to provide detailed problem description.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Stefano_________ لايوجد حل انقطعات متكررة وفي هذه حالة يتم تخلي عن مودام vr300 وبيعه
- Copy Link
- Report Inappropriate Content
You could connect a computer to the modem router via Ethernet cable and login its web interface via tplinkmodem.net, then go to Advanced->Wireless->Wireless Settings page to check or change the wireless password.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 22965
Replies: 127
Voters 1
