Deco x60 software and range
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, I bought 3 deco x60 for my house, I have Israel variant is here they sale the EU variant I get the Version V2.
My house is around 1830 sq ft without the Yard.
The problem is before I bought the units I tried 2 unites from a friend the he has the US variant.
I didn't know that there is a different.
In the same spot that I had the EU and the US variant. I get much more speed and range on the US, im a bit disappointed because on the basement the US version work very solid just 1 unite and this like seems gives less, and I paid the same.
If there is possibility to install the US software or Variant on my device this is will do something?
And what the difference between deco x60 v1 v2 v3 v3.6
I get v2 when I bought, there is a difference?
Thank you Very much for supporting.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, I tend to think it is not related to the EU or US version.
And actually, the firmware for Deco X60 V2 is the same for the EU and US versions.
- Copy Link
- Report Inappropriate Content
so you said that the EU and US are the same devices ? without limitation from what I know that the US is more open in the channels am I right? or in this model, this is the same as the US the software and the hardware are the same?
and I have a problem connecting with my security cameras the signal in the cameras are not good as it was on the previous mesh system I used Xiaomi mesh system and I have Imilab Wifi CAMERAS.
1 at the Kitchen 1 at the bedrooms 1 outdoor camera at the front of the house.
2 model Imilab A1 1 model Imilab ec3
The signal from what I see in the cameras show very low and they are very close to the unites. for example 1 of the camera 20 cm from the unit and it's got 56% signal the outdoor camera has just 21% signal and the bedrooms camera also not very good 38% signal.
This is not happened with my Xiaomi routers before. i want to upgrade my system and this makes a downgrade. also, I have Roborock s6 max wifi robotic vacuum cleaner and also shows a low signal.
I have 3 units of deco x60, they are new barely 3 days, what do you suggest me to do?
and another problem is the camera does not choose the right unit, the close and keep choose the main unit there is an option to force the camera to choose the close unit and not the main.
@
- Copy Link
- Report Inappropriate Content
there is any solution? thank very much for try to help me.
- Copy Link
- Report Inappropriate Content
Hi, the firmware is the same for both versions but the hardware would have some limitations due to the local regulation in different countries, such as the channels(more for 5Ghz) you have mentioned earlier.
As for the signal range, I would like to follow up on your case by email, and could you please help me check the following information:
1.Except for the smart IoT devices, how about the normal network devices, like your smartphone and laptop, would they be able to get a good signal?
2.Since these smart devices mainly use 2.4ghz, if you enable the guest network for 2.4ghz only with a different SSID, will the signal get much stronger?
By the way, could you please help me run a simple test:
Put one of the satellite Deco X60 next to the main Deco, in the same spot as the Imilab cameras; then please help me check the signal source on the satellite Deco.
Thank you very much
- Copy Link
- Report Inappropriate Content
@TP-Link
Hii I did what u said and my network is separated the 2.4 work on Guests mode, I don't get any change if this is separate or not same result.
I put the camera next to the main unit and also put the satellite next to the main unit the camera get 60% signal and connected to the main unit
what is the problem I don't understand why is like that.
on the cellphones I get around 76mb on 2.4 and 150-180 on 5ghz
I have up to 200mb DSL network.
this is some pictures from the deco app and also from the xiaomi mi home app
why the signal down 40%? how this is possible they are in the same spot and in the bedrooms camera upstires
this is not connected also to the near unit just the main.
I have 3 floors house and that big big problem.
https://mega.nz/folder/2p5WECLA#Z6dsfrvROqC0yKTOA00osQ
@TP-Link
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1225
Replies: 6
Voters 0
No one has voted for it yet.