Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Allow static IP outside DHCP range

< Deco

Allow static IP outside DHCP range

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Allow static IP outside DHCP range

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Piitaya

2021-09-03 21:01:28

Posts: 4

Helpful: 8

Solutions: 0

Stories: 0

Registered: 2021-08-08

Allow static IP outside DHCP range

2021-09-03 21:01:28

Model: Deco X60

Hardware Version: V2

Firmware Version: 1.5.1 Build 20210617 Rel. 77193

Is it possible de assign static IP outside DHCP range ?

For example :

Gateway : 10.0.0.1

Mask : 255.255.0.0

DHCP range : 10.0.0.2 - 10.0.0.254

I want to set a device to 10.0.10.1 ip (which is compatible with the subnet mask) but I have this message : IP must be between 10.0.0.2 and 10.0.0.254.

All my previous routers allow that but not Deco X60 😞

3 Reply

TP-Link

2021-09-09 09:39:24

Posts: 6831

Helpful: 3039

Solutions: 536

Stories: 28

Registered: 2018-07-23

Re:Allow static IP outside DHCP range

2021-09-09 09:39:24

@Piitaya

Hi, Did you manually change the DHCP range to be 10.0.0.2-10.0.0.254?

With subnet mask 255.255.0.0(LAN IP 10.0.0.1), the IP range would be 10.0.0.1-10.0.255.254.

If you are just curious about whether Deco allows static IP outside the DHCP range, the answer is no since currently, address reservation does not support manually adding the IP and MAC address and it needs to be chosen from devices list.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

Piitaya

LV1

2021-09-12 20:16:35

Posts: 4

Helpful: 8

Solutions: 0

Stories: 0

Registered: 2021-08-08

Re:Allow static IP outside DHCP range

2021-09-12 20:16:35

@TP-Link

Yes, I try to set 10.0.0.2-10.0.0.254 for the DHCP range but I can not set IP reservation outside the DHCP range with the deco so I revert to 10.0.0.1 - 10.0.254.254.

Here's my use-case :

- 10.0.0.2 - 10.0.0.254 : DHCP range for dynamic ip (no reservation)

- 10.0.1.1 - 10.0.1.254 : reservation range for servers, printer, etc...

- 10.0.2.1 - 10.0.2.254 : reservation range for IOT devices

I set 10.0.0.1 - 10.0.254.254 for DHCP range but I have not garanted to not have dynamic IP in 10.0.1.1 - 10.0.1.254 or 10.0.2.1 - 10.0.2.254 range.

Other routers allow IP reservation outside DHCP range. Is it something we can see in the future with Deco devices ?

KirbyCrouton

LV1

2022-02-08 06:42:35

Posts: 10

Helpful: 27

Solutions: 0

Stories: 0

Registered: 2022-02-07

Re:Allow static IP outside DHCP range

2022-02-08 06:42:35

@Piitaya

I have a similar request and use case. Sorry I missed your post!

https://community.tp-link.com/en/home/forum/topic/530980

Allow static IP outside DHCP range

Allow static IP outside DHCP range

Information

Voters 1

Tags