WPA/WPA2 ENTERPRISE Radius auth does not seem to work on AX6000
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
We currently use the configuration below with a Mikrotik router but that does not work with AX6000 using the conf below. The log we see in the radius server is:
Error Message
mschap: FAILED: No NT/LM-Password. Cannot perform authentication
This seems to be a bug as all these parameters below are correct. Once again, when we use Mikrotik we can login with user/pass to authenticate into wi-fi without any issues
Can anyone help me?
Thanks.
It seems that you missed configuring a particular parameter on the radius server, and you have figured it out already. Congratulations.
Since the issue was resolved already, we will close this topic then.
If anyone encounters a similar issue when connecting to a radius server with WPA/WPA2-Enterprise on the router, please review all the settings on the radius server carefully, ensure you didn't miss anything that is important for the connection.
Have you tried these security settings:
If the above settings don't work for you, then look at the following list - it may lead you to the root cause.
https://marc.info/?l=freeradius-users&m=128626292908052&w=2
It seems that you missed configuring a particular parameter on the radius server, and you have figured it out already. Congratulations.
Since the issue was resolved already, we will close this topic then.
If anyone encounters a similar issue when connecting to a radius server with WPA/WPA2-Enterprise on the router, please review all the settings on the radius server carefully, ensure you didn't miss anything that is important for the connection.