TP-Link Archer AX73 Internet Speed drop by 50% after few hours

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link Archer AX73 Internet Speed drop by 50% after few hours

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link Archer AX73 Internet Speed drop by 50% after few hours
TP-Link Archer AX73 Internet Speed drop by 50% after few hours
2021-10-29 06:50:51
Model: Archer A10  
Hardware Version: V1
Firmware Version: 1.0.3 Build 20210717 rel.64680(4555)

TP-Link Archer AX73, a new router, bought it 2 weeks ago and after some hours or even less the WiFi speed is dropping from 100mbps to 40-50 Mbps. I give him restart and sometimes is going back to normal and sometimes not, and again and again. super disappointed about the router, is working worst then a 4 years router without antennas.

If you have any fix you are more then welcomed to share it

Tks !

  2      
  2      
#1
Options
1 Reply
Re:TP-Link Archer AX73 Internet Speed drop by 50% after few hours
2021-11-01 11:41:55

@roslaur 

 

Hello, please follow the guide below to check and confirm if the QoS settings on the AX73 is configured correctly, you can try to disable it if necessary, then connect a computer to the AX73 with an Ethernet cable to test the speed again:
https://www.tp-link.com/support/faq/3069/


If you are talking about the wireless speed, please verify which band are you testing the speed, 2.4G or 5G? What kind of wireless devices you are testing the connection with the AX73, can we have the brand and model of it? If it is a computer, we would like to know the model of it, please ensure it is running with the latest driver, thanks.


You can also check and modify the 2.4G and 5G wireless settings on the AX73, you can check that by installing an app like Wi-Fi Analyzer on your phone or laptop and test, then set a channel with less congestion according to the test results on the AX73, and change the 2.4G channel width to 40MHz, and 5GHz to 80MHz, reboot the AX73 and reconnect to the network then conform.

  0  
  0  
#2
Options