Home Network Community > Deco > How to disconnect a device using Automation?
< Deco

How to disconnect a device using Automation?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to disconnect a device using Automation?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to disconnect a device using Automation?
How to disconnect a device using Automation?
2022-01-19 22:16:04 - last edited 2022-01-24 05:42:17
Model: Deco M5  
Hardware Version: V3
Firmware Version: 1.5.7 Build 20210819 Rel. 43499

Hello,

 

How do I disconnect a device using Automation?

 

Here is what I did:

  1. I set the time
  2. Adds trigger that when a device is connected... (disconnect it during the set time)
  3. Selected action device
  4. Now here in add action, I only have 2 options. High Priority and Delay Action when triggered.

 

Thanks.

  0      
 
  0      
 
#1
Options
9 Reply
Re:How to disconnect a device using Automation?
2022-01-20 06:42:27

@FruitNinja 

Hi, would you mind telling me what you wish to achieve via automation in detail, like when the smartphone is connected to the Wi-Fi, turn on the smart light in the hallway?

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:How to disconnect a device using Automation?
2022-01-20 07:53:38

@TP-Link 

 

Hello, I want to disconnect a smartphone when Deco detects it online at a specified time.

Example: I want to disconnect devices that is found online at 11pm - 6am.

  0  
  0  
#3
Options
Re:How to disconnect a device using Automation?
2022-01-20 09:16:28 - last edited 2022-01-24 05:42:17

@FruitNinja 

Thank you for getting back to me.

Since you can not see an action to disconnect the trigger devices, I am afraid the current request could not be achieved by automation.

If you do not mind, the bed time under parental control might be a good idea.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options
Re:How to disconnect a device using Automation?
2022-01-20 09:23:35

@TP-Link 

 

Thanks. I'll try it later 

  0  
  0  
#5
Options
Re:How to disconnect a device using Automation?
2022-01-24 05:22:31

@TP-Link 

 

Hi, it seems like the Parental Controls is not working as intended. The device can't access the internet even after the set time. What could be the problem? Thanks.

  0  
  0  
#6
Options
Re:How to disconnect a device using Automation?
2022-01-25 06:26:35

@FruitNinja 

Hi, can you send some screenshots about the configuration of the bedtime under parental control?

By the way, the device could not have internet service for 24h or actually, the bedtime would be delayed for a few hours?

At the same time, could you please go to Deco APP>Overview>settings on the top left>help>contact us>suggestions and add the APP log to us?

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#7
Options
Re:How to disconnect a device using Automation?
2022-01-25 13:06:00

@TP-Link 

 

Hi, here is my configuration:

 

            

 

"By the way, the device could not have internet service for 24h or actually, the bedtime would be delayed for a few hours?"

No internet service. The bed time schedule is on time, but still no internet even after it ends.

 

"At the same time, could you please go to Deco APP>Overview>settings on the top left>help>contact us>suggestions and add the APP log to us?"

Log sent.

 

Thanks.

  0  
  0  
#8
Options
Re:How to disconnect a device using Automation?
2022-01-26 00:56:07

@FruitNinja 

Thank you for getting back to me and I got the email.

I see the spent online time is 2.1h and there is also blocked history under the insight.

In this way, I think the internet service on the TV should be ok.

Since the TV is under Child profile, there are some blocked contents by default. I guess maybe the TV programs have been clarified into one of the categories and blocked.

In this way, could you please move the TV to the Adult profile and check again? 

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#9
Options
Re:How to disconnect a device using Automation?
2022-01-26 14:25:41

@TP-Link 

 

Hi,

 

I get the same results with Adult profile.

 

           

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 828

Replies: 9

Related Articles
Parental Control will not disconnect from device.
997 0
 Guests network automation
709 0
Mac - "Another Device on the Network is Using"...
2575 0
Ewelink / Sonoff devices not pairing for home automation using Deco M4
1565 3
Deco M9 suddenly disconnect device and refuse Wi-Fi connection
2052 1
 Deco M5 - automation rules are faulty
2815 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.