AX6000 needs individual QoS control!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX6000 needs individual QoS control!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX6000 needs individual QoS control!!
AX6000 needs individual QoS control!!
2022-01-25 17:18:16
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: V1_211208

This has been discussed a ton here with AX routers.
You need to add back the option to control individual device QoS Bandwidth control.You had or have it on other routers but not for the ones that cost $300. The QoS on this router is useless when using device priority. Setting any device on that list to on actually makes that device's network performance worse then when it's off. I've tested this a few times and noticed increased latency when it's on then when it's off. Please add back the individual QoS stuff again so we can make specific IP/MAC addresses use High, Medium, Low, etc settings.

  0      
  0      
#1
Options
1 Reply
Re:AX6000 needs individual QoS control!!
2022-01-26 23:05:15

@Elite214969 The exact same thing happens to me with the archer ax11000. They have to fix that.

  0  
  0  
#2
Options