error 8980
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello from Italy. I use this tplink as a cascaded access point to the main modem. i have these errors in the event log. always and continue. can you help me? ps:in the photos the time is updated because I pressed get time from pc. but with each reboot it goes back to 1970. can it be solved? thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You got nothing to worry about.
All these log messages are normal when you're using the modem/router in AP mode - Case 2.
Most of them are because you're not connecting TD-W8980 LAN4/WAN port but using its LAN(1-3) port to connect to your ISP modem with DHCP server disabled.
Same with the time setting - you need to do that manually every time after restart (not so important though), because you're not using TD-W8980 LAN4/WAN port.
If you use the TD-W8980 LAN4/WAN port (in wireless router mode) you'll avoid most of these messages in event logs, but you'll introduce a double NAT in your network.
Bottom line - you're just fine with the current configuration of TD-W8980.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The problem you're describing has nothing to do with your log records.
The issues with 2.4 GHz band may be due to a strong wireless interference around you.
You can use this guide to select the optimal wireless channel for 2.4 GHz band - https://www.metageek.com/products/inssider/
Determine the optimal (less crowded) wireless channel may improve your wireless experience on 2.4GHz band.
Using LAN4/WAN port is irrelevant since double NAT may lead to LAN devices communication problems.
Using WAN port would make sense only if your internet cable goes directly to your TD-W8980 WAN port (i.e. not using an ISP modem/router).
- Copy Link
- Report Inappropriate Content
@JohnGhost i think double nat creates problems ..
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 418
Replies: 4
Voters 0
No one has voted for it yet.