AX6000 V1 ethernet issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Andrea68, thank you for reaching out to us and welcome to the TP-Link community.
Please follow the guide below to check and ensure the QoS settings are configured correctly:
https://www.tp-link.com/support/faq/3069/
What is the link speed when the computer is connected to the AX6000 via a cat 5 cable? Follow this guide to check it. If possible, test with another PC or laptop that connects to the LAN port of the AX6000.
- Copy Link
- Report Inappropriate Content
HI @Kevin_Z the link speed is 1000 Mbyte. I'm following your suggestions about QoS settings. But till now no effects. The last check that I'll do is cable update. I got cat 8 cable I'll wait for them
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z with cable cat 8 and fine tuning on MTU size in order to avoid fragments performance are increased a bit and it is more acceptable. DL 180 Mbps and UL 150Mbps
- Copy Link
- Report Inappropriate Content
That is still not good. Can I have the brand and model of the Ethernet adapter on the PC? Please check and determine if there is any Anti-virus software running on this PC, be sure there are no special settings that target to limit the speed on it.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z In order to connect my router I use a power line connection using two TP-Link TL-PA8010P KIT Powerline AV1300 with sw version 2.7.0.44_02_80113_200714_902 than a TP-Link LS105G switch and at the end there is my company PC: HP EliteBook 840 G5, Intel(R) Core(TM) i7-8550U CPU with Windows 10 Enterprise N build id 19042.1586. The NIC is: Intel(R) Ethernet Connection (4) I219-V with drive version: 12.19.0.10. All cables are now cat 8 of 1 or 2 meters lengths. Today the router speed is dl 668 Mbps ul 184 Mbps and the pc speed is dl 175 Mbps and ul 144 Mbps
- Copy Link
- Report Inappropriate Content
So the network layout is like below?
FTTN modem ----- (WAN) AX6000 (LAN) ---~2m cat 8 cable-- PA8010P ===powerline==== PA8010P ---~2m cat 8 cable-- TP-Link LS105G switch ---~2m cat 8 cable-- HP EliteBook 840 G5
Is there a possibility to connect the PC or another laptop to the AX6000 LAN with a cat 8 cable directly to determine what is the actual speed you can get? As there are mixed devices in the network, it's hard to say the issue lies in the AX6000 now, most importantly, the 5G speed is much better than the wired ethernet speed.
As per the powerline network, can you install the TP-Link tpPLC utility to determine what is the powerline rate? Then refer to the FAQ here to determine if that is normal.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z
Using direct PC connection using CAT 8 cable I got DL 180Mbps and DL 138 Mbps than using 5G connection using Google Speed test I got DL 455Mbps and UL 134 Mbps
If I connect to my working station using Google Speed test I got DL 104Mbps and UL 108 Mbps and the result of the TP-Link tpPLC utility is 363 Mbps
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 689
Replies: 7
Voters 0
No one has voted for it yet.