Speed Via AX50 half of what I get through standard modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Speed Via AX50 half of what I get through standard modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Speed Via AX50 half of what I get through standard modem
Speed Via AX50 half of what I get through standard modem
2022-02-16 19:31:03
Model: Archer AX50  
Hardware Version: V1
Firmware Version: Latest firmware

Hi

 

Has anyone had success resolving this? Have updated QoS and made sure no priorities are active. Device and application.

 

This is not why I bought this router to throttle my speed. I bought it to improve strength of signal, now it's worse.

 

Any help appreciated.

 

Thanks

 

 

  0      
  0      
#1
Options
2 Reply
Re:Speed Via AX50 half of what I get through standard modem
2022-02-17 02:11:35 - last edited 2022-02-17 02:14:27

DavidLpl wrote

Hi

 

Has anyone had success resolving this? Have updated QoS and made sure no priorities are active. Device and application.

 

This is not why I bought this router to throttle my speed. I bought it to improve strength of signal, now it's worse.

 

Any help appreciated.

 

Thanks

 

Hello @DavidLpl, thank you for reaching out to us, and welcome to the TP-Link community.

 

Hello, do you mean only the 2.4GHz connection is slow? Is the 5GHz speed normal? If that is the case, it's quite possible that the 2.4GHz band around you is highly congested. You can check that by installing an app like Wi-Fi Analyzer on your phone or laptop and test, then set a channel with less congestion according to the test results on the AX50.


Check this troubleshooting article for more suggestions:
https://www.tp-link.com/support/faq/2170/

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Speed Via AX50 half of what I get through standard modem
2022-02-17 08:41:02
Thanks No it can't be congestion. I have tested with isp modem and I am getting full speed. 5ghz is better (nearer or on advertised speed) 2ghz I'm only getting 60-90) when it should be 200mb. As I say, speed is fine with ISP modem. Thanks
  0  
  0  
#3
Options