Revert DNS settings to default (supplied by ISP)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Revert DNS settings to default (supplied by ISP)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have the AC2100 modem router. I have changed the DNS to watchDNS settings. However there is no option to revert to the default setting where the DNS settings are those set by the ISP. Online instructions from TP-Link show there should be a tick box labeled 'use ISP supplied DNS' or some similar term. My interface does not include this. If I leave the DNS (optional) fields empty I have no service. Thanks in advance for any help that can be offered,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
same problem this error pkts from the router not from the line if you want stable connection downgrade from v1.4 to v1.1 but the packet loss will not disappear same error pkrs in all firmware version 1.1& 1.3 & 1.4 @Clem_Viking
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I've had regular disconnections. I called my ISP and had them do a line check. With the VR600 connected (I didn't tell them I wasn't using their supplied unit) they said the line was detecting as lots of faults. I then had them test the line with nothing attached in the house. The line was fin. Once again with my TP-Link connected and they had lots of errors. Once again, without telling them I connected their supplied modem (huwei) and had them run the tests again. This time there were no errors and I have been using it since. It seems my VR600 will be getting returned, :(
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2131
Replies: 13
Voters 0
No one has voted for it yet.