AX73 unable to communicate between Wired LAN and Wireless LAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Does anyone have these kind of issue?
ping from wired lan to wireless lan - not working
ping from wireless lan to wired lan - not working
ping from wired to wired - working
ping from wireless to wireless - working
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Are these ping tests performed on the same wired and wireless clients? What are they? Are they connecting to the internet fine via the AX73? Be sure there are no settings on the client devices that blocking the ping from others.
- Copy Link
- Report Inappropriate Content
@Kevin_Z yes pinging between 2 pc and both have wireless and wired interface.
also try the test with pc to printer and others devices like iot.
- Copy Link
- Report Inappropriate Content
Sample of scenario here :
Wireless Windows PC : 10.88.77.45
Subnet mask : 255.255.255.192
Gateway : 10.88.77.1
Wired Windows PC : 10.88.77.35
Subnet mask : 255.255.255.192
Gateway : 10.88.77.1
Client devices on wifi : 10.88.77.40
Subnet mask : 255.255.255.192
Gateway : 10.88.77.1
Antivirus and Firewall Disable on all machines
=====================================
Windows connected using WIRELESS
=====================================
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 10.88.77.45
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 10.88.77.1
C:\Users\test>ping 10.88.77.40 -t
Pinging 10.88.77.40 with 32 bytes of data:
Reply from 10.88.77.40: bytes=32 time=122ms TTL=64
Reply from 10.88.77.40: bytes=32 time=133ms TTL=64
Reply from 10.88.77.40: bytes=32 time=159ms TTL=64
Reply from 10.88.77.40: bytes=32 time=77ms TTL=64
Reply from 10.88.77.40: bytes=32 time=90ms TTL=64
Reply from 10.88.77.40: bytes=32 time=107ms TTL=64
Ping statistics for 10.88.77.40:
Packets: Sent = 6, Received = 6, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 77ms, Maximum = 159ms, Average = 114ms
Control-C
====================================
Windows Connected using WIRED
====================================
Ethernet adapter AX73-LAN:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 10.88.77.35
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 10.88.77.1
C:\Users\test>ping 10.88.77.40 -t
Pinging 10.88.77.40 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.88.77.40:
Packets: Sent = 8, Received = 0, Lost = 8 (100% loss),
- Copy Link
- Report Inappropriate Content
Is there a reason to set the subnet 255.255.255.192? Try changing it to 255.255.255.0, then check again if the ping is accessible on all devices.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hey Kevin,
Yes that subnet mask is intended to be like that.
Anyhow, after tinkering with the router configurations for few weeks, i managed to found the root cause of the issue.
This issue happen whenever the bonding is configured for LAN 2 & 3.
This is also applied for both Static LAG and LACP mode.
But this issue won't happen immediately after you enable it, it will take some random time for it to happen.
But in my case I am noticing that on average this will occurred around 30mins after i've enable the bonding.
Apart from the connectivity issue between both LAN and WIFI, there also another issue happening especially on WIFI devices.
the device will disconnected and won't be able to reconnect. it will also throw you and error of wrong password even though the password that you set is correct.
- Copy Link
- Report Inappropriate Content
So... @Kevin_Z , this can be fixed or do i need to file for RMA/REFUND?
- Copy Link
- Report Inappropriate Content
Hello @pdudkronos
Do you mean you are configuring Link Aggregation between LAN 2 & 3 on the AX73? What is the device connected to LAN 2 & 3, is the Windows PC? Does it support Link Aggregation? Can you please explain this in more detail? I would like to have the detailed network layout, then I may suggest better.
Regarding the wireless connectivity issue, can I know if it is the 2.4G or 5G connection? when the error happens, how do you connect back to the network? Do you need to reboot the router?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 810
Replies: 7
Voters 0
No one has voted for it yet.