LED Controls and Reboot schedule missing
There are not options for LED control and reboot schedule in Archer C6 v3.20 router. They are present in the C20 routers.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @joshiwifi
As per the User Guide of Archer C6 v3.20, it should support LED Control as well as Reboot Schedule, please check:
https://static.tp-link.com/manual/2021/202107/20210714/1910012805_Archer%20A6(US)_UG_REV3.0.0.pdf (Page 73-74 & Page 78)
If your router doesn't support these two, I would like to know its region version and firmware version, then we can confirm. Be sure the firmware is up-to-date.
- Copy Link
- Report Inappropriate Content
Hardware Version: Archer C6 v3.20
Firmware Version: 1.0.14 Build 20211118 rel.43110(5553)
The firmware is up to date, the router is operating in AP mode. There are no setting options for LED and Reboot scheduling
- Copy Link
- Report Inappropriate Content
When working in AP mode, Archer C6 doesn't support LED Controls or Reboot Schedule as stated in the following FAQ:
What’s the difference between the Access Point Mode and Router Mode on the TP-Link wireless router?
You can try to switch the C6 to Router mode first, configure the LED Controls and Reboot Schedule, then switch it back to AP mode to confirm if they still take effect.
I hope this works.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 442
Replies: 3
Voters 0
No one has voted for it yet.