Home Network Community

Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > AC1200 wired connection

< Deco

AC1200 wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC1200 wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

arphillips

LV1

2022-06-03 22:05:16

Posts: 5

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2022-06-03

AC1200 wired connection

2022-06-03 22:05:16

Model: Deco M4

Hardware Version:

Firmware Version: 1.6.0

I have 3 Deco's setup in a mesh. One if wired into my router. Everything on Wifi works fine.

Each time my wired Windows PC boots it shows that the network port us unplugged, disabling it and enabling it fixes the issue. However I don't want to do this for the rest of the PC's life.

I know that this isn't an issue with the PC, it has been tested on other networking equipement and comes up first time each boot. Other machines (pi's and laptops) also have the same issue.

I have tried setting a static IP and using dynamic. I have also tried both ethernet ports on the Deco unit.

Any suggestions would be appreciated.

5 Reply

terziyski

LV7

2022-06-04 13:17:42 - last edited 2022-06-05 14:00:26

Posts: 6471

Helpful: 4620

Solutions: 969

Stories: 7

Registered: 2013-10-12

Re:AC1200 wired connection

2022-06-04 13:17:42 - last edited 2022-06-05 14:00:26

@arphillips

Have you tried with a different ethernet cable or plug the PC to the other M4 unit ?

Sometimes bad cabling can cause such an issue - use a factory made CAT 5e/6 cables to be sure that you can achieve 1 gbps connection to the M4.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

arphillips

LV1

2022-06-04 21:15:48

Posts: 5

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2022-06-03

Re:AC1200 wired connection

2022-06-04 21:15:48

@terziyski yes, cable and units have changed.

David-TP

2022-06-06 11:47:34

Posts: 10831

Helpful: 1443

Solutions: 914

Stories: 9

Registered: 2020-04-14

Re:AC1200 wired connection

2022-06-06 11:47:34

@arphillips

Thank you very much for your feedback.

Does it matter which Deco the wired computer is connected or does it happen to all the 3*M4?

And is there any network switch between the ISP router and main M4 or the main M4 and wired PC?

If yes, can I have the model number of the switch?

Best regards.

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

arphillips

LV1

2022-06-06 12:06:28

Posts: 5

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2022-06-03

Re:AC1200 wired connection

2022-06-06 12:06:28

@David-TP No, happens on all 3 devices. No switches or hubs anywhere.

David-TP

2022-06-07 08:27:52

Posts: 10831

Helpful: 1443

Solutions: 914

Stories: 9

Registered: 2020-04-14

Re:AC1200 wired connection

2022-06-07 08:27:52

@arphillips

Thanks for the update.

I would like to forward your case to the senior engineer for further assistance.

Please check whether you have got an email from us.

Best regards.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

arphillips

LV1

2022-06-03 22:05:16

Posts: 5

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2022-06-03

Information

Helpful: 2

Replies: 5

AC1200 wired connection

AC1200 wired connection

Information

Voters 1

Tags