Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Setting up TP-Link Deco X20-DSL with Internode Australia

< Deco

Setting up TP-Link Deco X20-DSL with Internode Australia

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting up TP-Link Deco X20-DSL with Internode Australia

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Jack1574

2022-06-19 04:37:15 - last edited 2022-06-20 07:11:53

Posts: 2

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2020-10-30

Setting up TP-Link Deco X20-DSL with Internode Australia

2022-06-19 04:37:15 - last edited 2022-06-20 07:11:53

Tags:

Model: Deco X20-DSL

Hardware Version: V1

Firmware Version: Current

Hi everyone

Having some issues setting up the X20-DSL with internode. specifically getting it to authenticate.

Tried setting up the connection using a TP-Link TD-W9970 VDSL modem. Just followed the wizard and popped in the username/password and it works fine.

on the Deco it gets line sync but never authenticates.

So i took the X20-DSL and tried with Telstra and Aussie broadband that does not use PPPOE to authenticate and it just works.

Has anyone else had this issue and found a way around it? At this stage i am planning a move to a new ISP to rectify the issue.

Cheers

3 Reply

David-TP

2022-06-20 07:24:15

Posts: 12414

Helpful: 1714

Solutions: 1125

Stories: 9

Registered: 2020-04-14

Re:Setting up TP-Link Deco X20-DSL with Internode Australia

2022-06-20 07:24:15

@Jack1574

Hi, welcome to the community.

For the internode broadband connection, except for the PPPOE authentication, do you also need VLAN ID/internet ID?

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

Jack1574

LV1

2022-06-20 07:45:43 - last edited 2022-06-20 07:46:11

Posts: 2

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2020-10-30

Re:Setting up TP-Link Deco X20-DSL with Internode Australia

2022-06-20 07:45:43 - last edited 2022-06-20 07:46:11

Hi David,

have tried with vlan off and on, it should be off because it is an older internode account.

After contacting the internode help desk this is the setting they supplied

Cheer.

1. Connect up as standard for VDSL.
2. Login to router using 192.168.1.1
3. Go to advanced at the top.
4. Network on the left.
5. DSL under Network.
6. DELETE all networks
7. Add new connection.
8. Select VDSL
9. Change username and password details.
10. Save.

Service should connect reasonably quick.

NBN Username: ******@internode on net
Authentication Type: PPPoE
Authentication Method: CHAP or PAP
Connection Type: VDSL2 Annex B with Vectoring
VLAN should be disabled

David-TP

2022-06-21 02:54:59 - last edited 2022-06-21 02:56:38

Posts: 12414

Helpful: 1714

Solutions: 1125

Stories: 9

Registered: 2020-04-14

Re:Setting up TP-Link Deco X20-DSL with Internode Australia

2022-06-21 02:54:59 - last edited 2022-06-21 02:56:38

@Jack1574

Hi, Thanks for the update.

There is another firmware for Deco X20-DSL and please refer to the private message to see whether it helped or not.

Thank you very much.

Best regards.

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

Setting up TP-Link Deco X20-DSL with Internode Australia

Setting up TP-Link Deco X20-DSL with Internode Australia

Information

Voters 1

Tags