Please test gigabit LAN speed on Archer VR2100

Please test gigabit LAN speed on Archer VR2100
Please test gigabit LAN speed on Archer VR2100
2022-06-21 13:28:55 - last edited 2022-06-22 00:45:32
Model: Archer VR2100  
Hardware Version: V1
Firmware Version: 1.5.0 0.9.1 v009e.0 Build 210722 Rel.37847n

Hi, please can someone test what is the maximum LAN speed between two devices connected to the Archer VR2100. I can get maximum 550Mbps.

 

Thank you.

  0      
  0      
#1
Options
3 Reply
Re:Please test gigabit LAN speed on Archer VR2100
2022-06-22 01:05:29

  @ScreenName23 

 

The transfer speed will heavily depend on what fixed drives these devices are using.

They could be HDD, SSD or NVMe, thus the speed will differ according to the hardware installed.

Other factors may involve ethernet cards make/model, their driver version and settings.

If this was helpful click on an arrow pointing upward. If this solves your issue, click the star to mark it as a "Recommended Solution".
  2  
  2  
#2
Options
Re:Please test gigabit LAN speed on Archer VR2100
2022-06-22 01:21:45

  @terziyski can u just test it ?

  0  
  0  
#3
Options
Re:Please test gigabit LAN speed on Archer VR2100
2022-06-22 02:53:30 - last edited 2022-06-22 07:15:30

  @ScreenName23 

 

I would test it if I had Archer VR2100, sorry.

You can see on the following URL how to use the 'iperf' command to test your network bandwidth:

https://www<dot>dell<dot>com/support/kbdoc/en-bg/000139427/how-to-test-available-network-bandwidth-using-iperf

You can add to the iperf client side '-P 10' parameter so you can saturate the bandwidth of the link, initiating 10 parallel connections.

If this was helpful click on an arrow pointing upward. If this solves your issue, click the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options